Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 19th March 2012, 10:33 PM
snapper snapper is offline
Senior Member
 
Join Date: May 2007
Location: Chelmsford, Essex
Posts: 360
Default

It's all in the IVA manual
300mm or less
I've built one, helped on 3 others and we have 2 more in the barn.
300mm
Reply With Quote
  #12  
Old 20th March 2012, 09:22 PM
shh120m's Avatar
shh120m shh120m is offline
Senior Member
 
Join Date: Sep 2010
Location: thirsk
Posts: 557
Default

Iv seriously overdone it this time, no wonder why i spent so much on p clips

At least mr IVA will be happy
__________________
A few build photos... www.photobucket.com/ntsengineering
Reply With Quote
  #13  
Old 21st March 2012, 11:14 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

Quote:
Originally Posted by snapper View Post
It's all in the IVA manual
300mm or less
I've built one, helped on 3 others and we have 2 more in the barn.
300mm
i read the iva manual cover to cover and checked the a pdf with word find and could not find it so would love to know what page its on
Reply With Quote
  #14  
Old 22nd March 2012, 12:03 AM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Quote:
Originally Posted by baz-r View Post
i read the iva manual cover to cover and checked the a pdf with word find and could not find it so would love to know what page its on
It's in the section titled "General Construction"

7. All electrical cables/wires must be free from chaffing and secured at intervals of at least every 300mm unless contained in a secure hollow component.
Reply With Quote
  #15  
Old 24th March 2012, 11:44 AM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

i put this in post #8
it applys to eletrical cables and its the fuel and brake pipes that i cant find the info for.
i dont think there is an "real" dimantion in there
Reply With Quote
  #16  
Old 24th March 2012, 12:11 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Sorry, should have read the whole thread properly

I can't find any dimensions for hoses/pipes either. I think the relevant section is "Hydraulic and Vacuum Systems", but it basically just says they need to be securely and adequately clipped/supported.
Reply With Quote
  #17  
Old 7th October 2012, 02:02 PM
jps jps is offline
Senior Member
 
Join Date: May 2012
Location: Colchester, Essex
Posts: 439
Default

Quote:
Originally Posted by skov View Post
Sorry, should have read the whole thread properly

I can't find any dimensions for hoses/pipes either. I think the relevant section is "Hydraulic and Vacuum Systems", but it basically just says they need to be securely and adequately clipped/supported.
I'm just about to go and cut and drill the 'perforated' steel strips to down the transmission tunnel - and can't find any clear reference in the whole IVA manual to a set distance for fluid carrying lines - other than 'A brake pipe or hose must be adequately clipped or otherwise supported' - in the 'Hydraulic and Vacuum Systems' section.

Given that 300mm is stated as the necessary interval for electrical wires in the 'General Construction' bit it's fairly logical to argue that the same dimensions apply to any other similarly fixed item...

To be on the safe side i'm going to go a little under - say 250mm - when drilling my holes for the p-clip rivets...
Reply With Quote
  #18  
Old 8th October 2012, 04:45 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

a genral rule of thumb is fix every 8" 200mm or less and you should be ok from sva and iva pass reports

also recomended by car builder solutions
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.