Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 16th June 2011, 11:27 AM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default wires

Hi All
Working on the wiring at the minute
On the column there are switches with wires coming out,,, on the loom i have matched up the same wires but what is the best way to join them together, would i pull out the wires from the switch and replace with the new wires or just bare the wires on both and twist solder and heatshrink the join .
Reply With Quote
  #2  
Old 16th June 2011, 02:04 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

You could put terminals on if you need to remove it again.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #3  
Old 16th June 2011, 02:07 PM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default

good thinking i will go and do that now
many thanks
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:20 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.