#1
|
|||
|
|||
Couple of questions
Hi all,
First question is, what oil do i need for my diff ? Second one is, how do i work out the torque settings for the wishbones ? Third one is, where can i get made to order braided brake lines Thanks in advance. Terry |
#2
|
|||
|
|||
1. Think I used gear and diff oil from Halfords, exact spec is in the sierra Haynes manual, don't have t to hand though.
2. Don't know! 3. Rally design make them to order, or Russbost on locostbuilders. Cheers Adrian |
#3
|
||||
|
||||
According to Autodata it should be SAE90W and it takes 0.9 litres.
D.
__________________
visit my website at www.cossie.davenewell.co.uk |
#4
|
||||
|
||||
2) - Torque for an M12 8.8 Bolt is about 86NM
3) - You can make your own using rally design euroquip fittings.
__________________
Gallery 2 http://www.facebook.com/album.php?ai...4&l=a9831a9319 Gallery 3 http://www.facebook.com/album.php?ai...4&l=3f0d42c523 Gallery 4 http://www.facebook.com/album.php?ai...4&l=efb083b7df Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5 cd3a Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=1&l =fe779b358c |
#5
|
||||
|
||||
I just got mine from russborst on locost builders. Very good quality next day service and a nice guy. Not the cheapest in the world but it's worth the piece of mind that it's right.
If you have drums I got 4 x m10x1 bulkhead fittings 2 ends had swivel bulkheads the other had banjo fittings with 20deg bend on them and banjo bolts. it came to just under £80 Inc vat and del. |
Thread Tools | |
Display Modes | |
|
|