Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 1st April 2011, 08:01 AM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

Alloy sumps almost always weigh more than their pressed steel counterparts. the use much more material.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #12  
Old 1st April 2011, 12:18 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Going to list some other details for my own reference as much as anything.

Engine dimensions 620 x 580 x 615
Bore Stroke 78.0 x 83.6
cc 1597
CR 9.4:1
Max Pwr @ 6500
Max Tqr @ 5500
IVO 5˚ BTDC
IVC 51˚ ABDC
EVO 53˚ BBDC
EVC 15˚ ATDC
Gearing 1st 3.136 2nd 1.888 3rd 1.330 4th 1.000 5th 0.814 R 3.758 FD 4.3
Reply With Quote
  #13  
Old 1st April 2011, 02:26 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Two pages from the book about compactness and lightness......


Reply With Quote
  #14  
Old 1st April 2011, 02:32 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Great to see you've started a build thread, I'll be watching with interest!

You want to get signed up on the mx5nutz.com forum too, the OC forum is a bit of a graveyard nowadays...
Reply With Quote
  #15  
Old 1st April 2011, 02:54 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Quote:
Originally Posted by skov View Post
Great to see you've started a build thread, I'll be watching with interest!

You want to get signed up on the mx5nutz.com forum too, the OC forum is a bit of a graveyard nowadays...
Will do thanks.
Reply With Quote
  #16  
Old 1st April 2011, 08:18 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Main fuse arrived today! Got it started and warmed up on the drive, sounded great, alt. belt is very loose but took it for a spin on the neighbours farm track. It goes it stops and it made be smile, but it still has to die for my build!

Brakes were rubbish but it had been sat for two years, engine was fine other than the alt. belt, gearbox felt great, no whines or unusual noises so my mind is at ease!
Reply With Quote
  #17  
Old 4th April 2011, 07:44 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

OK I have rebuilt a new and improved workbench at the back of the garage with old fire-doors (my preferred method of building workbenches) vice is very handy and well lit, sealed the garage floor as the concrete is crappy and by 6pm on Sunday night I had started knocked up a new and improved shopping basket and walking stick attachment for my old dads mobility scooter which I finished at about 10:30pm, he was well impressed. My welding technique is improving but I now understand the importance of jigging and weld magnets, oh and big gas bottles! I bought a big hacksaw, new wire-brush and a round file today too. I want to paint the garage floor grey this week and get more practice in but on 25mm SHS. Oh and put up some halogens over the bench.

Last edited by CTWV50 : 4th April 2011 at 07:55 PM.
Reply With Quote
  #18  
Old 6th April 2011, 03:58 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

The last 24hrs have proved useful, discovered my hoard of retro gaming paraphernalia is worth a bob or two and will fund a good part of the build, it was cluttering up the garage! 2 birds, 1 stone, springs to mind. Just got to test and list the lot, which I'm not looking forward to.

This morning I went over to a steel fabrication company we do some IT work for and had a chat with owner and he's going to supply the steel and allow me to use some of their equipment for bending and cutting, he also gave me some great advice on cutting angles in steel using a mini-grinder, and using co2 rather than argon due to cost, argon only really necessary for stainless steel apparently. Got some 3mm 40mm SHS, 3mm plate and 5mm channel to mess around with, Might even have a go at the wishbones with their help. Very Happy!
Reply With Quote
  #19  
Old 6th April 2011, 05:40 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Sounds like you are making some great progress towards the grand build start day

Ebay is certainly a great place to help top up the build pot.

Pleased to read that all is well with your donor, I know what a relief that must be

Eager to follow your progress
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #20  
Old 6th April 2011, 09:54 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Cheers bonzo, determined to do this right, involve the kids and keep the financial cost impact on daily living to minimum. My other family pastime is horse riding and that does a good job of emptying the current account regularly!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.