Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 31st July 2011, 04:25 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default nut'n'bolt group buy?

Would any body be interested in a suspension nut and bolt group buy? I know this has been run twice before but I'm sure there are a few new builders that will be needing these soon. At this point I'm only looking for people to regesture their interest so if it falls short I don't end up with 1000's of parts that will take months to shift,although some will be put on ebay.
If want to add your name to the list reply with 'quote' edit this bit off and add your name.
Package will contain the following
2 x M12 X 260mm Bolts (Rear Uprights)
2 x M12 X 200mm Bolts (Diff Mounts)
20x xM12 X 70mm Bolts (Wishbones, Rear Camber Adjuster, Lower Shock Mounts)
6 x M12 X 60MM Bolts (Upper Rear and Front Shock Mounts)
30 x M12 Nyloc nuts (Type P - these are a bit thicker than normal nuts and better suited to suspension applications)
30 x M12 Plain full nuts (these are for test fitting components without ruining the Nyloc nuts)
60 x M12 Flat washers (Form A)
60 x M12 Black plastic nut covers.


1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

Last edited by Talonmotorsport : 1st August 2011 at 07:15 PM. Reason: brain fart
Reply With Quote
  #2  
Old 31st July 2011, 06:27 PM
voucht's Avatar
voucht voucht is offline
Senior Member
 
Join Date: Jun 2011
Location: Lautrec, Tarn (81), Occitanie, France
Posts: 873
Default

Hi Phil,
Can you give the approximative price of the set please ?
Thanks.
Reply With Quote
  #3  
Old 31st July 2011, 10:47 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

Quote:
Originally Posted by voucht View Post
Hi Phil,
Can you give the approximative price of the set please ?
Thanks.
A2 STAINLESS OPTION REMOVED ON SAFTY GROUNDS

Price of the 8.8 BZP is 23.00 a set plus 8 P&P
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

Last edited by Talonmotorsport : 1st August 2011 at 08:30 PM.
Reply With Quote
  #4  
Old 31st July 2011, 11:30 PM
mikemph mikemph is offline
Member
 
Join Date: Sep 2010
Posts: 85
Default

Plated is fine with me as they will be covered with caps... and stainless bolt threads tend to pick up and are scrap once that happens. We use lots of stainless components and fasteners on our steam turbines at work and I hate working with them lol.

Although a good coating of copperslip or aluminum spray does help alot.
__________________
http://m1kemph.wordpress.com<---- build blog clicky

Check us out on facebook. Hamlet Engineering Services limited
Reply With Quote
  #5  
Old 31st July 2011, 11:51 PM
TSM Locost's Avatar
TSM Locost TSM Locost is offline
Senior Member
 
Join Date: Mar 2007
Location: Wisbech
Posts: 422
Default Stainless Bolts warning.

A2 -70 are not as strong as 8.8 bpz the nearest is A4-80



Metric Class Marks on Head Material Tensile Strength Yield Strength
N/mm2 psi N/mm2 psi
8.8 8.8 Steel 800 116,000 640 93,000
10.9 10.9 Steel 1040 151,000 940 136,000
12.9 12.9 Alloy Steel 1220 177,000 1100 160,000
A2-70 A2-70 302 Stainless 700 102,000 450 65,000
A4-80 A4-80 316 Stainless 800 116,000 600 87,000
__________________
Be Lucky, Mike.
Reply With Quote
  #6  
Old 1st August 2011, 12:13 AM
TSM Locost's Avatar
TSM Locost TSM Locost is offline
Senior Member
 
Join Date: Mar 2007
Location: Wisbech
Posts: 422
Default Stainless Bolts warning.

A2-70 stainless bolts are rated @ 7.0 302 grade
A4-80 stainless bolts are rated @ 8.0 316 grade

I spoke with the tester @ Norwich several years ago when i had my SVA and he insisted that 8.8 was the industry standard minimum for any suspension / steering assembly,
__________________
Be Lucky, Mike.

Last edited by TSM Locost : 1st August 2011 at 12:19 AM.
Reply With Quote
  #7  
Old 1st August 2011, 01:56 AM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,509
Default

hi Phil.....are you doing any for the sierra based build?
Reply With Quote
  #8  
Old 31st July 2011, 10:03 PM
mikemph mikemph is offline
Member
 
Join Date: Sep 2010
Posts: 85
Default

1. Mikemph
2.
3.
4.
5.
6.
7.
8.
9.
10.
__________________
http://m1kemph.wordpress.com<---- build blog clicky

Check us out on facebook. Hamlet Engineering Services limited
Reply With Quote
  #9  
Old 1st August 2011, 11:06 AM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

If this is for the sierra build then I'll have a set of the BZP.


1. Mikemph
2. Gaz05
3.
4.
5.
6.
7.
8.
9.
10.
__________________
Total cost so far
Materials 3,150
Tools 855
Reply With Quote
  #10  
Old 1st August 2011, 11:42 AM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,509
Default

Gaz.....I am fairly sure this group buy is for the mazda donor
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 11:33 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.