Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 20th September 2011, 03:59 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default Any generous builders

We need a pair of spline adaptors to fit on the lobro drive shafts we have for the single seater if anybody has a spare set from their build that they do not need or not used. We have the drive shafts just need the spline ends PLEASE.

Thought there is bound to be some unused on here.....

Many Thanks in Advance..........AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #2  
Old 20th September 2011, 05:48 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,341
Default

Do you mean the diff output flanges? (not that I have any spare.)

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost 4181.65 - Last - Wheel Cylinders
Reply With Quote
  #3  
Old 20th September 2011, 06:01 PM
Jimmyd Jimmyd is offline
Senior Member
 
Join Date: Jul 2008
Location: Portaferry, Co Down
Posts: 246
Default

Quote:
Originally Posted by twinturbo View Post
Do you mean the diff output flanges? (not that I have any spare.)

TT
If it is I have a spare 7.5 diff which I could rob if needed?

J
Reply With Quote
  #4  
Old 20th September 2011, 06:15 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Thanks TT and Jimmy, not sure if they are the same but it's the outer flange to spline, wheel side, that we need. we have the rest but for some reason they are missing. The car now has engine running, diff and chain fixed so just need these to get the rear wheels spinning.

Cheers....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #5  
Old 20th September 2011, 06:37 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,341
Default

Ahh right, the rear stub axle.. Still not got one spare mind.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost 4181.65 - Last - Wheel Cylinders
Reply With Quote
  #6  
Old 20th September 2011, 09:36 PM
Jimmyd Jimmyd is offline
Senior Member
 
Join Date: Jul 2008
Location: Portaferry, Co Down
Posts: 246
Default

Quote:
Originally Posted by spud69 View Post
Thanks TT and Jimmy, not sure if they are the same but it's the outer flange to spline, wheel side, that we need. we have the rest but for some reason they are missing. The car now has engine running, diff and chain fixed so just need these to get the rear wheels spinning.

Cheers....AndyH
Sorry don't have! Could have help'd if diff side.

J
Reply With Quote
  #7  
Old 21st September 2011, 10:23 AM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Thanks again Jimmy and TT, just thought i would try the forum first.

Nathan has offered to lend the pair off his car just till we get sorted.

Cheers....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #8  
Old 21st September 2011, 10:28 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Certain sure that I have a spare pair here

I'll have a root about later this morning & drag em out.

They are the standard Sierra ones from a 2l with rear disks fitted ( 7" Diff )

Is it just the flanges you need ?, I have the bearing carriers here but they are a tad crusty & possibly in need of new bearings.

Hope that helps
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #9  
Old 21st September 2011, 11:43 AM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Hi Ronnie,

That is exactly what we need, just the flanges. Bearings and everything else is ready to fit, for some reason the flanges are missing.

Thanks......AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #10  
Old 21st September 2011, 01:04 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

I'll root them out & get them in the post to you ASAP

Think they are in my top shed, failing that, they'll be down my inspection pit.
If they are down the pit, Junior will get em out when he comes in from work
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:05 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.