Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 23rd December 2013, 11:15 PM
Richwill Richwill is offline
Junior Member
 
Join Date: Jul 2013
Posts: 9
Default

http://i1370.photobucket.com/albums/...psyjtzcklh.jpg
Reply With Quote
  #22  
Old 23rd December 2013, 11:17 PM
Richwill Richwill is offline
Junior Member
 
Join Date: Jul 2013
Posts: 9
Default

The link above works.
Reply With Quote
  #23  
Old 23rd December 2013, 11:28 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

I think what he has 'tried' to do is raise the nose bonnet and scuttle up to clear the engine, which would make some sense but why not use full lengths instead?
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

Last edited by Talonmotorsport : 23rd December 2013 at 11:32 PM.
Reply With Quote
  #24  
Old 23rd December 2013, 11:33 PM
Richwill Richwill is offline
Junior Member
 
Join Date: Jul 2013
Posts: 9
Default

Does this need doing? I have the 1.6 engine and box from a Mk1 Mx5 to fit in.
Reply With Quote
  #25  
Old 23rd December 2013, 11:46 PM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

I have seen the Vodou body work about 2 years+ ago and can say now it will be a very tight fit. I'm not sure that Matt ever got round to offering an engine to the chassis with the bonnet in place, I'd be very surprised if there was more than maybe 1 or 2 pulls from the moulds. You have a few options but both the bonnet and the sump will need cutting to make it fit.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
  #26  
Old 24th December 2013, 12:04 AM
Richwill Richwill is offline
Junior Member
 
Join Date: Jul 2013
Posts: 9
Default

Thanks for the input Phil. I will have to look into the options to arrive at the best solution.
Reply With Quote
  #27  
Old 24th December 2013, 12:15 AM
PorkChop PorkChop is offline
Senior Member
 
Join Date: Jul 2011
Posts: 394
Default



If you wrap img tags around the URL (that's [IMG] before and [\IMG] after the URL of your photobucket link), it'll embed the pics for you in the post.

Out of interest, what happened to the Vodou moulds etc, does anyone know?
Reply With Quote
  #28  
Old 24th December 2013, 10:37 AM
Talonmotorsport's Avatar
Talonmotorsport Talonmotorsport is offline
Senior Member
 
Join Date: Oct 2007
Location: Southminster Essex
Posts: 1,323
Default

As far as the moulds go I can't help any further with as I really don't know what happened to Matt and Vodou after I delivered the chassis, it seemed to be moving on then just sort of went quiet after 2 months no phone calls,emails or forum posts.
You could try contacting Mark formerly of Triton as he advised Matt on the processes of making GRP parts but I think contact between them died off too after a while.
__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.