|
#1
|
||||
|
||||
What Thrust Bearing?
This has probably been covered before...
I'm using a 1.8 zetec bottom end, and mt75 box. I know i can use a 1.8 zetec clutch, but what thrust bearing do i use?? |
#2
|
|||
|
|||
The only one I know of is the westfield special but they're very touchy about selling to non westfield owners. Other option is to mod the release arm to move the release BRG closer to the clutch cover but be careful you don't run out of travel on the first motion shaft cover!
HTH BV. |
#3
|
||||
|
||||
Don't most people use a CT133 from Quinton Hazell? I used a Capri release bearing on my build to make up the slack between the gearbox and clutch.
|
#4
|
||||
|
||||
|
#5
|
||||
|
||||
What about trying Burton power or Raceline ?
|
#6
|
|||
|
|||
I got the ECB 113 from Burtons, it uses a carrier that is 8mm thicker
Last edited by snapper : 3rd June 2010 at 07:47 AM. |
Thread Tools | |
Display Modes | |
|
|