|
|
|
|
#1
26th October 2012, 02:52 PM
|
|||
|
|||
Harness top mount covers - what are you using?
My car is pretty much ready for IVA, apart from covers for the harness top mounts, and its beginning to pi$$ me off!
I can't find covers that will actually go over the top mounts of my Sabelt harnesses. I've tried the Pajero ones on eBay, but they are nowhere near wide enough. I tried emailing Sabelt directly (twice!), and got no reply. What have you guys found that works? Cheers Adrian 
|
|
#2
26th October 2012, 08:21 PM
|
||||
|
||||
|
Nut cap on the bolt and edge trim on the plate?
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#3
27th October 2012, 09:26 AM
|
|||
|
|||
|
Ash's car failed IVA at the same test centre I'll be using with a nut cap and trim, so I'm trying to find an alternative.
Cheers Adrian
|
|
#4
27th October 2012, 09:51 PM
|
||||
|
||||
|
i used a piece of black vinyl fabric. Bolt through the middle, sown across one side and press stud the other to get to the bolt, passed IVA with no problems,
__________________
http://s50.photobucket.com/albums/f340/sid15/Kit/
|
|
#5
27th October 2012, 09:53 PM
|
||||
|
||||
__________________
http://s50.photobucket.com/albums/f340/sid15/Kit/
|
|
#6
28th October 2012, 11:25 AM
|
||||
|
||||
|
Having got round the seat belt problem did it then fail on not having any triangulation on the roll bar?
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
