Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 1st April 2012, 10:20 AM
adrianreeve adrianreeve is offline
Senior Member
 
Join Date: Mar 2007
Posts: 401
Default How long should gelcoat take to cure?

Hi there, I have a quick question about Gel coat. Been repairing a small knock in my rear wing this weekend. Fibreglass all good, then put the gel coat on top of the repair. I did this yesterday afternoon, and the gelcoat is hard, but the surface is still tacky, meaning that I can't sand and puta second coat over the first. how long should it take for the gel oat to go off? I'm reasonably sure I added the correct amount of activator.

Cheers

Adrian
__________________
My Build Pictures:

http://s1234.photobucket.com/albums/ff406/adrianreeve/
Reply With Quote
  #2  
Old 1st April 2012, 10:55 AM
MarkB MarkB is offline
Senior Member
 
Join Date: May 2011
Location: naughty step most of the time
Posts: 494
Default

To do repairs like that you should either use top coat which is sometimes called flow coat or add a percentage of wax solution to the normal gel coat. It will never cure hard.
Your best bet is to dig out the gel then redo it but put some thing like acetate or anything plastic that won't stick to it to seal it so the air can't get to it........Or just use resin pigmented to suit as this will cure and is easy to flat off and polish up.
Reply With Quote
  #3  
Old 1st April 2012, 10:59 AM
MarkB MarkB is offline
Senior Member
 
Join Date: May 2011
Location: naughty step most of the time
Posts: 494
Default

By the sound of it it is low as you mention needing another coat?...Try covering the second coat with a plastic bag then seal the edges to keep the air out.

Gel cures on a mould face because there is no air, the surface you lay up on is tacky as this allows the resin to do it's chemical thang and join forces with the gel and stick like sticky stuff to blankets.......But if the gel is left too long and loses it's tackyness then there is every chance the chemical James Bond bit won't work properly.

It's not rocket science but it is a black art......
Reply With Quote
  #4  
Old 1st April 2012, 12:04 PM
adrianreeve adrianreeve is offline
Senior Member
 
Join Date: Mar 2007
Posts: 401
Default

Cheers Mark
__________________
My Build Pictures:

http://s1234.photobucket.com/albums/ff406/adrianreeve/
Reply With Quote
  #5  
Old 1st April 2012, 04:19 PM
robo robo is offline
Senior Member
 
Join Date: Jun 2011
Location: scabs
Posts: 1,722
Default

Also the gel coat as a repair wont be getting a good cooking from the f/g lay up so it might pay to give it a gentle warming. Just thoughts.

Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory
If I had two brains I,d still be a halfwit

The cave http://s1116.photobucket.com/user/my...deshow/mancave

The build http://www.haynes.co.uk/forums/showthread.php?t=12669
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 10:14 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.