#1
|
|||
|
|||
rear calliper spacing
sorry guys, i know this has been covered before but im still confused. i noked up some rear uprights in the drum orientation, then bought some adaptor plater from 3g to convert to disks. the first question is do i need to mackine down the original calliper hanger ty the thickness of the plate.
also before i finish weld the uprighs completeley are the book drawings correct as i have seen people mention callipers mounted at 45 degrees before, cheers guys Last edited by georgenewman1 : 23rd November 2009 at 10:49 PM. Reason: wrong title |
Thread Tools | |
Display Modes | |
|
|