#1
|
|||
|
|||
How to draw angles on pipe
Dear All,
Today I started cutting my pipes, the cutter has degrees but not in detail, is there any way that I can draw them on the pipe using a marker and the cut it. I am in Peshawar Pakistan we I am unable to get a cutter with all the angles in detail. Looking forward to your reply anxiously Hamza |
#2
|
|||
|
|||
I think you are talking about a protractor,this can be used to mark the angles and then cut it.
Good luck. |
#3
|
|||
|
|||
If you are talking about the round tubes do a search on google for a PC program called "tubemitre" . It will enable you to print patterns for the tube. you print them on a standard PC printer then stick them on to your tubes.
hope that helps, Enoch |
#4
|
|||
|
|||
Thanks a lot
Hi flyerncle,
Thanks a lot, it never occured to me, I was trying to use the one that is totally covered, Just got a Protractor out of the geometry box in the store, the one that has empty space in between and it works, (photo attached as Protector 2) Hamza |
#5
|
|||
|
|||
Tubemiter works miracles
Enoch,
Thanks as ever, you solved my next very important problem- Tubemiter is a great software, will soon be posting my pictures- I realy appreciate your help hamza |
#6
|
|||
|
|||
That's why we are here Hamza,global Roadster building and help at you finger tips.
Draw a thick black line with felt tip marker pen and it is much easier to see and use a sharp scriber to mark the line for accuracy. |
Thread Tools | |
Display Modes | |
|
|