Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 23rd January 2015, 08:02 PM
KenK KenK is offline
Member
 
Join Date: Aug 2009
Location: East Yorkshire
Posts: 53
Default Hazard light help

I am using LED indicators. I have changed the relay to one for LED,s, the indicators work fine, flash ok etc however when I switch the hazards on the indicators all flash but instead of flashing on and off they flash on then dim i.e not fully off.

Using Sierra wiring and switches, anybody any ideas what's wrong please?

Thanks
Ken
Reply With Quote
  #2  
Old 23rd January 2015, 08:26 PM
NeilW NeilW is offline
Senior Member
 
Join Date: Jun 2014
Location: Sunderland, Tyne and Wear
Posts: 224
Default

Not 100% sure! but i have seen threads previously about people having to play with various relay types and/or resistors.
Link http://www.advrider.com/forums/showthread.php?t=641854

Might help
Reply With Quote
  #3  
Old 7th February 2015, 07:29 PM
KenK KenK is offline
Member
 
Join Date: Aug 2009
Location: East Yorkshire
Posts: 53
Default

Thanks Neil, had a look again today, after trying different relays etc I found that if I took the bulb out of the button the lights work ok. I have an Acewell dash which has the required warning lights so should be ok with that
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:49 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.