Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 20th July 2009, 06:36 PM
semtexsteve semtexsteve is offline
Member
 
Join Date: May 2009
Location: taunton
Posts: 55
Talking At last I am getting there

today i have finished cutting and tacking the main chassis together . i have just done the trans tunnel all i need to do is the rear frame . i will try to put som pics up soon i now most of you have seen it all before but it a huge mile stone for me . P.S. do you think it is ok to start to fully weld the chassis so far please advise ??????

Last edited by semtexsteve : 20th July 2009 at 06:37 PM. Reason: spelling
Reply With Quote
  #2  
Old 20th July 2009, 06:49 PM
fabbyglass
 
Posts: n/a
Default

Make sure you have all the diagonals tacked in and that there are no big gaps.... ........then weld the beast up but be careful how you go and do a weld here and a weld there don't whack too much heat into one area at once or it will distort.
And have fun
Reply With Quote
  #3  
Old 20th July 2009, 06:53 PM
fabbyglass
 
Posts: n/a
Default

Not wanting to teach anyone to suck eggs but...if for any reason you find yourself with a tube a tad short or the gap a bit iffy cut another piece of tube don't go trying to fill gaps too much as you will put way too much heat into and end up with a big 'nana.
Reply With Quote
  #4  
Old 20th July 2009, 07:05 PM
semtexsteve semtexsteve is offline
Member
 
Join Date: May 2009
Location: taunton
Posts: 55
Default

thanks mate all the diaganles are in and taked and no big gaps i only got 1 or 2 small ones none no biger than 1mm . i had 1 or 2 miss cuts but as you said i just cut new ones [ got it right second time [ or 3rd ] ] cant wait to start to fully weld it and make the rear frame thanks again
Reply With Quote
  #5  
Old 20th July 2009, 07:35 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

well done on this milestone of your build, it is a great achievement to get to this point in your build.

pictures are a must,

well done

andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.