Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Donor cars
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #91  
Old 26th August 2013, 07:27 PM
PorkChop PorkChop is offline
Senior Member
 
Join Date: Jul 2011
Posts: 394
Default

Quote:
Originally Posted by skov View Post
Those shock lengths are fine, but I wouldn't take the spring rates as gospel.

Nathen had started supplying 400lb springs for the front as he thought it rolled too much, which is what I ended up with.
From my experience that's a recipe for massive understeer. It also gives a horrible jolty ride on bumpy roads as the rear can't react fast enough to catch up with the front.
I'm not convinced Saturn's original values would be much better either.

Having done some calculations (albeit full of assumptions/guestimates/errors) I came to the conclusion that the rear needs to be around 100lbs harder than the front, and that 300 front / 400 rear would be a good starting point.

As a quick test I swapped mine over and put my 250lb springs on the front and my 400lb springs on the rear and went out for a drive.
Have to say it's transformed the car!
The ride is far more composed on bumpy roads, and I've got shed loads of front grip.
It's possibly gone a little too far the other way, as it's ever so slightly tail happy now. It is however nicely controllable and much more fun that way
I'll get some 300lb springs for the front and report back at somepoint.
Ah, didn't know that Nathan had changed the specs John - I copied them off the website when Nathan announced he was going to shut up shop, because they weren't in the build guide.

I don't know the spring rates used, but Spud's car seemed fine to me WRT suspension set up when I've been out in it. I'm guessing Spud used his car as a starting point for speccing the MX5 build.

I need to buy rear dampers and springs for my build (I already have Protech front dampers, which funnily enough are Sierra spec rear dampers and 250lb springs). I've been impressed by the reviews Procomp have got so I was planning to source the rear dampers through them and hopefully get their opinion on spring rates etc to start with.
Reply With Quote
  #92  
Old 26th August 2013, 08:33 PM
skov's Avatar
skov skov is offline
Senior Member
 
Join Date: Jan 2011
Posts: 1,085
Default

Quote:
Originally Posted by PorkChop View Post

I don't know the spring rates used, but Spud's car seemed fine to me WRT suspension set up when I've been out in it. I'm guessing Spud used his car as a starting point for speccing the MX5 build.
That was my guess too. The thing is, Spud's car was Sierra based which has a very different rear geometry.

Talking to procomp sounds like a good idea, let us know what they recommend!
Reply With Quote
  #93  
Old 30th August 2013, 08:22 PM
jason 82 jason 82 is offline
Senior Member
 
Join Date: Feb 2012
Location: Coleford
Posts: 354
Default

I don't mean to be thick, but if the coilovers we require is 13inch + a 1 inch extention, why don't they specify 14 inch coilovers ? Or am I missing something ?
Reply With Quote
  #94  
Old 30th August 2013, 11:03 PM
Stot's Avatar
Stot Stot is offline
Senior Member
 
Join Date: Nov 2012
Location: Wolverhampton
Posts: 750
Default

Quote:
Originally Posted by jason 82 View Post
I don't mean to be thick, but if the coilovers we require is 13inch + a 1 inch extention, why don't they specify 14 inch coilovers ? Or am I missing something ?
I would say they said 13" + 1" as they thought people who had already built and or purchased shocks could add an inch extension to their build and carry on but theres no reason not to go straight for 14" if you are buyng new.

I'm using standard GAZ 14" at the front no problem.

Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP
Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
Reply With Quote
  #95  
Old 31st August 2013, 12:01 AM
jason 82 jason 82 is offline
Senior Member
 
Join Date: Feb 2012
Location: Coleford
Posts: 354
Default

Cheers for that stot.
Reply With Quote
  #96  
Old 30th September 2013, 07:28 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Quote:
Originally Posted by skov View Post
Those shock lengths are fine, but I wouldn't take the spring rates as gospel.

Nathen had started supplying 400lb springs for the front as he thought it rolled too much, which is what I ended up with.
From my experience that's a recipe for massive understeer. It also gives a horrible jolty ride on bumpy roads as the rear can't react fast enough to catch up with the front.
I'm not convinced Saturn's original values would be much better either.

Having done some calculations (albeit full of assumptions/guestimates/errors) I came to the conclusion that the rear needs to be around 100lbs harder than the front, and that 300 front / 400 rear would be a good starting point.

As a quick test I swapped mine over and put my 250lb springs on the front and my 400lb springs on the rear and went out for a drive.
Have to say it's transformed the car!
The ride is far more composed on bumpy roads, and I've got shed loads of front grip.
It's possibly gone a little too far the other way, as it's ever so slightly tail happy now. It is however nicely controllable and much more fun that way
I'll get some 300lb springs for the front and report back at somepoint.
Cool I'll swap my 250lb and 400lb around during the final build.
Reply With Quote
  #97  
Old 30th September 2013, 09:32 PM
Davidbolam Davidbolam is offline
Senior Member
 
Join Date: Mar 2011
Location: Gosforth, Newcastle Upon Tyne
Posts: 856
Default

Quote:
Originally Posted by CTWV50 View Post
Cool I'll swap my 250lb and 400lb around during the final build.
I've gone for the rear springs at 250lb and the front 375.

Will give it a go and maybe swap them around see what the difference is.

Hopefully I will get to test it on an airfield before the road and iva anyway as a shakedown

David
__________________
Click to see my build photos on Flikr

http://www.flickr.com/photos/67112582@N03/

Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack.

Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though).
Car iva'd and passed 15/08/2014. Finished weight 572kg.
Reply With Quote
  #98  
Old 1st October 2013, 12:02 AM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Quote:
Originally Posted by Davidbolam View Post
Hopefully I will get to test it on an airfield before the road and iva anyway as a shakedown

David
That's Handy!
Reply With Quote
  #99  
Old 6th October 2013, 11:07 AM
Stot's Avatar
Stot Stot is offline
Senior Member
 
Join Date: Nov 2012
Location: Wolverhampton
Posts: 750
Default

I bought a Haynes Manual for the wiring diagrams on Friday only to find the diagrams didn't really match my car too well.

A bit of hunting turned up this page with LOADS of MX5 service manuals.

http://www.mellens.net/mazda/

Really useful to an MX5 builder.

Cheers
Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP
Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
Reply With Quote
  #100  
Old 18th March 2014, 08:10 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Some more info on mx5 donor front suspension and experimentation....

http://www.haynes.co.uk/forums/showt...t=6206&page=31
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:39 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.