|
|
#1
3rd September 2013, 10:40 AM
|
|||
|
|||
Dashboard blanks
Has anyone bought a dashboard blank that fit our roadsters? I using the AGM bodywork but the width would be the same for all our builds.
Thanks M
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501 
|
|
#2
3rd September 2013, 11:57 AM
|
|||
|
|||
|
Quote:
I am going down there on Friday to get my bodykit and will see if I can take any pictures etc. How is your build coming along? David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#3
3rd September 2013, 12:21 PM
|
||||
|
||||
|
Hi,
Although the width is the same there are differences in the design that may make a difference. I've only really seen 3 pre made ones. The Equinox one which will likely only fit an Equinox scuttle properly as it has a recess molded into it so the dash they do will fit this recess. The flat ebay one with the IVA curve on the bottom. I tried to buy one of these but it never turned up and the user is no longer on ebay That leaves the one that Louthy has on ebay ( looks like its the same one as Gillham provide )  That one should fit any scuttle but looking at the radius on the bottom I'm not sure it meets 19mm radius so may have to be foam covered. I ended up making my own from leftover aluminium sheet with the 19mm radius on the bottom.  Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures
|
|
#4
3rd September 2013, 02:24 PM
|
|||
|
|||
|
Thats good news if AGM are making one for their scuttle
Anyone measured one up from a MK etc, there were some nice carbons around aswell that i'd like
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#5
3rd September 2013, 03:34 PM
|
||||
|
||||
|
Indy chassis is 5 cm narrower than the roadster...
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#7
3rd September 2013, 10:10 PM
|
||||
|
||||
|
I've got a Saturn one that IMO isn't great.
It's about 5mm too short and although it has a curve on the bottom I feel do iva it should return rather than just stop at 90deg to the face. I'm going to make an mdf one for iva then change after it.
|
|
#8
4th September 2013, 12:20 PM
|
|||
|
|||
|
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
