Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Donor cars
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 19th October 2010, 09:16 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default Some questions about donor stripping

Evening...Started stripping my granada today ...reining myself in to rip it to bits without labelling everything...and photographing...the granada loom is huge ...electric everything....SO my first question is how do you vent the aircon system in a safe sort of way..and do you usually leave the aircon pump on the engine so the belt pattern is the same...2ND question if i undo the prop shaft bolts is it an easy lift out with engine with fron x member removed ??
Reply With Quote
  #2  
Old 19th October 2010, 09:27 PM
rhysadams rhysadams is offline
Junior Member
 
Join Date: Oct 2010
Location: Hornchurch essex
Posts: 11
Default

Quote:
Originally Posted by Andy_B View Post
Evening...Started stripping my granada today ...reining myself in to rip it to bits without labelling everything...and photographing...the granada loom is huge ...electric everything....SO my first question is how do you vent the aircon system in a safe sort of way..and do you usually leave the aircon pump on the engine so the belt pattern is the same...2ND question if i undo the prop shaft bolts is it an easy lift out with engine with fron x member removed ??
hi im basing my roadster on the bmw e30 so not to sure about the air con unit sorry but im sure its very similar with taking the engine out i ubolted the prop from the diff and took the fron x member off and it came out quite easily and best of luck with you build
rhys
Reply With Quote
  #3  
Old 19th October 2010, 11:08 PM
mr henderson mr henderson is offline
Senior Member
 
Join Date: May 2008
Location: Aylesbury
Posts: 364
Default

Virtually all cars from the modern era the easist way to get all the bits out is to drop the whole subframe, suspension, engine and box down onto some dollies or even the floor, and lift the front of the car up and over.

It's how all that stuff went in at the factory

If you've got some dollies then all you have to do is to lift the front of the car and pull the engine etc out.

Best to leave the rear wheels on till this stage is complete
Reply With Quote
  #4  
Old 19th October 2010, 11:23 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default

I have got my hands an engine hoist for free too !
Reply With Quote
  #5  
Old 20th October 2010, 08:06 AM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

Easiest way to pull the motor from a Granny with an engine crane is cut out the front lower panel with a dangle grinder then pull the motor and gearbox out in one go with the hoist.

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #6  
Old 20th October 2010, 09:11 AM
mr henderson mr henderson is offline
Senior Member
 
Join Date: May 2008
Location: Aylesbury
Posts: 364
Default

If I am having the front suspension out as well, easier still is use the crane to lower the whole lot onto the floor, then use the crane to lift the bodyshell up so the power unit/subframe/suspension can be pulled out from underneath.

If the suspension is not being removed, then that would not be the best way.
Reply With Quote
  #7  
Old 20th October 2010, 10:04 AM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

I found it easier to remove engine and box and leave subframe till last, that way I retained a rolling shell during the strip down and pulled the suspension off last just before I scrapped the shell.

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #8  
Old 20th October 2010, 10:28 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Quote:
Originally Posted by Davey View Post
I found it easier to remove engine and box and leave subframe till last, that way I retained a rolling shell during the strip down and pulled the suspension off last just before I scrapped the shell.

D.
That's how I stripped my first Sierra donor

That way I still had a rolling shell .... This was then towed to the breakers on my A frame.
Once there, I undone all of the pre-loosened bolts & got them to lift the shell from the running gear.
Threw the A frame & running gear into the back of my truck & off I went
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #9  
Old 20th October 2010, 12:36 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,389
Default

Is it a twin fuses box granada or a single fusebox granada.

If it's single then the engine loom simply unplugs under the dash.

I would then ( personaly ) forget about the rest of the loom apart from any interconecting multiplugs that may be needed.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote
  #10  
Old 20th October 2010, 06:20 PM
Andy_B Andy_B is offline
Senior Member
 
Join Date: Oct 2010
Location: Strathclyde
Posts: 274
Default

Quote:
Originally Posted by twinturbo View Post
Is it a twin fuses box granada or a single fusebox granada.

If it's single then the engine loom simply unplugs under the dash.

I would then ( personaly ) forget about the rest of the loom apart from any interconecting multiplugs that may be needed.

TT

Ahhhhhhrrrggg just tagged every single connection removed from the engine too.....its a f'n single use box ...that i have found so far !!! just about to lift the engine out and she is showing her teeth...the prop bolts are solid...everything else has come off a treat ...waiting on wee bro with a bigger air gun....then its the angry grinder again !!!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:12 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.