Quote:
Originally Posted by SeriesLandy
If your going to use mx5 bits you will need a different bearing btw.
For the sierra shaft you will also need part of the original bearing. (It's all in the guide)
For the cables, about 2-3mm slits just enough to get the cable through.
|
Yeah I'm use using sierra bits, ok cheers
On another note on the pedal box what are the v cuts for on the foreword stops and also the book says you need 8 shock brackets but two are fixed to the uprights
Am I missing something?
2nd November 2014, 07:46 PM
Threaded Mode