Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Donor cars
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11th April 2015, 07:39 PM
Mking Mking is offline
Member
 
Join Date: Jan 2012
Location: Roslin, Midlothian, Scotland
Posts: 36
Default BMW 3 series

The planning is well under way for my build and I have even started painting the garage to make it a brighter and nicer place to spend many fun hours. I'm doing a lot of research towards my build and the big decision of donor car isn't far from my thoughts. Initially I had thought I would go MX5 as that seems the most common however on looking at them even the roughest ones are £500+. Then I looked at BMW's. They are cheap as chips, loads of them and have great parts availability. So what do the rest of you think? I know there is only a few hundred quid in it but I am doing this build on a tight budget so the cheaper the donor the better. Thoughts, experiences, modifications I'll need to make to the chassis all welcomed and appreciated.

Cheers

Matt
Reply With Quote
  #2  
Old 11th April 2015, 08:44 PM
K4KEV's Avatar
K4KEV K4KEV is offline
Senior Member
 
Join Date: Feb 2010
Location: WINGATE CO DURHAM
Posts: 1,511
Default

Sierra....no question ...it is what I would choose again
Reply With Quote
  #3  
Old 12th April 2015, 08:35 AM
vmax1974's Avatar
vmax1974 vmax1974 is offline
Senior Member
 
Join Date: Apr 2011
Location: Teesside
Posts: 1,141
Default

Dont forget whatever route you go down you will be abke to sell on any unused parts off the donor and you should factor that I when choosing the donor

just my thoughts

Good luck
Reply With Quote
  #4  
Old 13th April 2015, 12:51 PM
World's Worst Mechanic World's Worst Mechanic is offline
Junior Member
 
Join Date: Jan 2015
Location: Warwickshire, UK
Posts: 7
Default 328 build

I have stripped a 328 convertible and I will say that it came apart with very little fuss.

Bear in mind that the EOL breakers will not give you much at the moment as scrap is not as strong as it was. By the time they have picked it up (only a few breakers have a crane to do this) they'll be asking you for cash!

You can cut it up and take it down to the EOL breaker yourself but factor in the mess and the cost and I had an attack of CBA.

I'd like to know how easily the m52 engine goes into the Haynes chassis if anyone has experience.
__________________
If it ain't broke, I didn't fix it.
Reply With Quote
  #5  
Old 13th April 2015, 01:41 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Read the early parts of the Forum and Chris's brother did one with the six pot beemer.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #6  
Old 15th April 2015, 07:01 PM
Mking Mking is offline
Member
 
Join Date: Jan 2012
Location: Roslin, Midlothian, Scotland
Posts: 36
Default

Thanks for all the advice. I'll have a hunt through the early parts of the forum. I look forward to hearing how you get on Worlds Worst Mechanic.
__________________
Matt King

Total spent: £0

Achieving an ambition
Reply With Quote
  #7  
Old 16th April 2015, 01:29 PM
bz100's Avatar
bz100 bz100 is offline
Junior Member
 
Join Date: Nov 2010
Location: Algarve, Portugal
Posts: 27
Default

Mking I'm using BMW E46 (318) as a donor. Chassis is book std with some modifications on the front upper wishbones and rear upright. Fitting the diff is also different compared to Sierra diff.
I dont have a build blog but there is a lot of pictures in my photobucket account.
Hopefully the links below works for a quicker look.

http://i1190.photobucket.com/albums/...psv9mrslx5.jpg
http://i1190.photobucket.com/albums/...psfhdtjw8s.jpg
http://i1190.photobucket.com/albums/...psh9vasl0q.jpg
http://i1190.photobucket.com/albums/...psbqm510gt.jpg
__________________
Hans
Reply With Quote
  #8  
Old 18th April 2015, 09:45 AM
Mking Mking is offline
Member
 
Join Date: Jan 2012
Location: Roslin, Midlothian, Scotland
Posts: 36
Default

BZ100. Thank you that's a great help. I'm leaning more and more towards the challenge of a BMW donor. I look forward to seeing how your build progresses on here.
__________________
Matt King

Total spent: £0

Achieving an ambition
Reply With Quote
  #9  
Old 29th April 2016, 05:41 AM
danilo danilo is offline
Member
 
Join Date: Nov 2011
Posts: 30
Default

interesting donor choice.
Aren't the BMW engines rather heavy?
And tall?
Why are the brake discs painted black in the above photos?
Temporary rust prevention.. I hope.
Reply With Quote
  #10  
Old 29th April 2016, 09:35 AM
RichardH RichardH is offline
Senior Member
 
Join Date: May 2015
Location: fife scotland
Posts: 177
Default

performance brake discs come coated black these days, it stops rust forming inside the vents
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:15 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.