Identify Wires

[geeman]

Originally Posted by twinturbo

What engine are you using, and what have you done with the engine loom?

TT

ive got a 1.8cvh. Ive got it to turn over, and was being an idiot earlier, as i wanst looking at the ignition coils in my last post. Ive now found the ignition coils, and the plug from the edis connects to it. I now seem to have the ignition coils sorted, however when i was trimming my loom a mont or 2 back, i cut off all the plugs to the steering column, including the ignition switch. I am now wondering what i am meant to connect the black/yellow wire to that is on the ignition switch. I know the blue/black one goes tot he starter solenoid, but i dont know about the yellow/balck one.


Ill be asking alot of probaly very obvious questions as i dont know much about wiring this engine. Thanks


Edit: just saw your other post. i have connected the plug fromt he front body loom to the +12v. Now to figure out what the yellow.black wire is meant to be? it goes to pin 10 of the edia and the engine managemnet relay according to the haynes diagram