Build table

[thailoz]

Ok its time to stop lurking and get on with it .

I will be getting the materials for my build table this week....15 mm ply for the top and 2x2 for a frame

what should I use for legs and how tall have you guys found to be a good height ?


To be honest this is the bit ive been dreading I am crap at woodwork ,

[ozzy1]

Easiest thing i found was a couple of wooden saw horses.Also at a good height then.

[alga]

2x2 sounds a bit underengineered, that will definitely bend under the weight of the chassis. You could attach another sheet to the bottom to strengthen it. I used 2x4s and they've bent a bit with time.

Here's how I did the feet:
https://lh5.googleusercontent.com/-6MrVwH9f7no/USny1lXZfLI/AAAAAAAADSI/Yy_GfI602hQ/s640/2009-07-25-205917.jpg

[will_08]

Albert could you build me a snooker table? :p