good geoemetry :)

[baz-r]

my car has had a date with a 4 wheel aligner and i am very happy with my geometry

i have wheelbase difference of 1mm with equal track width of -11mm
rear toe -.02' and +.04' total 0.01'
rear camber 0.5deg each side (.30')
front camber 0.5deg each side
front castor of 4deg right and 5deg left
track was -0.53' now set to +0.16+

not bad for a garage build with a rule,tape and builders spirit level
and track set by feel

[Talonmotorsport]

Thats not bad going is it, I don't use any more complicated tools than you to produce my chassis offerings so there's hope for all there.