Rear grp tub frame?

[Joelove]

Hi all, I'm currently about to attach the D13 down rights the the rear tub frame but noticed that where they join the back rail they should attach to the inner face of the box section rather than the top like I have done in the pic? Is this essential or will the way I've got it be ok?



http://i1302.photobucket.com/albums/ag134/joelove123/th_3c555cc21259ec1c8fe3870d6bb96e70_zps1feecc2d.jp g (http://s1302.photobucket.com/albums/ag134/joelove123/?action=view&current=3c555cc21259ec1c8fe3870d6bb96e70_zps1feecc 2d.jpg)

[SeriesLandy]

That's how I've done mine as you can just about see here (http://www.flickr.com/x/t/0099009/photos/serieslandy/6011242772/)

[Joelove]

That's how I've done mine as you can just about see here (http://www.flickr.com/x/t/0099009/photos/serieslandy/6011242772/)

Ah yes, does it not affect anything then I.e fixing the tub etc?
P.s what are the drilled plates you have on the ends?

[SeriesLandy]

There for the roll bar stays. No it doesn't affect anything, the tub fastens under the rear spar (Saturn tub) and my 35l tank sits in between the 2 bars your about to weld in.

[vmax1974]

I believe they are for the roll bar rear stays

[Joelove]

Ah spot on, thanks