How do i wire this capri dash up

[waynes world]

Hi all, still trying to find out about the wiring for the capri rev counter i have. This is the pic of the back where the 3 connectors/nuts are, all i need to know is where to connect the wires on the car running a 2l pinto, i am only using the rev counter aswell with speedo so i am not using the loom or plug

Please can anyone help, i dont want to mess about as i dont want to damage it.

thanks

wolly

http://i409.photobucket.com/albums/pp172/wolly_03/Bury-20140220-01236_zps275bcc71.jpg (http://s409.photobucket.com/user/wolly_03/media/Bury-20140220-01236_zps275bcc71.jpg.html)

[waynes world]

Please anyone help

[Shorty]

I probably can't help much but I'm guessing those colour markings are not referring to the 3 connectors you need?
As far as I'm aware it will need a positive, negative and a feed from coil.

[baz-r]

brown is usually + fused permanent live on a ford

an old haynes manual will be your best place to look

[waynes world]

The colours marked on the back are the colour wires on the connector plug, all i have found is that the green goes to - coil, the others i dont know, i have a haynes skematic diagram that some body gave me but we cant find the rev counter on it.
So if the green is the coil- then i need an chassis earth and a ign + ??