Help required from a higher power !

[jason 82]

What is the best way of joining the Gillham rear arches to the tub please ? I want to use the wing piping, but wasn't sure wether to use 2 bits of plate to sandwich the panels to spread the load or not. The tubs seam to be very thin, & I am not sure of the best way to join it all up without busting the tub. :eek:

[wylliezx9r]

I used m10 bolts and penny washers either side about 6 per arch. Works a treat.

[K4KEV]

I pretty much did the same with 8mm and made sure where there was some steel work behind it I tapped it and used it also as a mounting point

[flyerncle]

I hope you mean 8/10 mm spanner size !:p

[SeriesLandy]

I hope you mean 8/10 mm spanner size !:p

I was thinking that, I used m6 stainless hex bolts for all the bodywork.

[jason 82]

Thankyou everybody for the help, it's appreciated.

[flyerncle]

Hell of a size hole in thin f/glass :eek: