MX5 build question

[Numplumb]

Hi All can someone who is building an MX5 equipped roadster please tell me on the brake master cylinder there is one banjo connection for the front brake and two connections on the bias valve marked front and rear so three connections altogether, so my question is which front side is which ie does the banjo connection direct from the master cylinder go to the offside, near side or does it matter
Regards Mick.

[Stot]

It doesn't matter both the fronts are on the same circuit in the M/C. I did left left and right right and the rear one to the rear brakes but never used the MX5 balancer.

https://lh6.googleusercontent.com/--Mnm2Odwctc/UdSVVPNh9vI/AAAAAAAAFo8/YKmT0NfY3W0/w800/brakelines3.JPG
https://lh6.googleusercontent.com/-7_osOZ-a46s/UdSVVEwL8nI/AAAAAAAAFok/qJNrzMGef9w/w800/brakelines2.JPG

Cheers
Stot