clutch arm pivot pin

[onedayTM]

I seem to remember something about clutch pedal travel not being sufficient in zetec installations.GBS do an extended clutch pin for the black top . Do you need this with the silver top , mondeo clutch and extended release bearing? I dont have any clutch pin in my box so I need to get one which do I get and if it's the std one, can I still get one from Ford do you think.
cheers
tony

[flyerncle]

You will be lucky to get anything for a Type 9 from Ford,I wnated flywheel pins and they have been out of stock for years.

[alga]

I believe the Black top and Silver top are identical WRT the clutch. I also have a 1.8 flywheel, Mondeo clutch and the longer CCT133 bearing. The clutch actuation point not far from the bottom of the pedal movement, but it works well as it is, pretty much.

[flyerncle]

1600 zetec f/wheel is lighter and aparently the better one to use.

[onedayTM]

cheers guys, so where do you think I could get pivot pin from then, Would the likes of Burton Power have one?
all suggestions welcome.
tony

[alga]

You mean this? http://www.bearingkits.co.uk/Clutch-fork-retaining-peg-for-Ford-Type-9-5-speed-gearbox-bellhousing/625.htm

[robj]

Burton power stock them. I need one as I put it in a safe place but can't remember where that was :(

[snapper]

GBS do an extended clutch arm pin than negates need for thicker release bearing