PDA

View Full Version : Speedo cable adapter


voucht
22nd April 2014, 09:10 AM
Hi,
I just figured out, now that my fuel lines are definitely fitted, that I can't fit the speedometer cable end in the gearbox... not enough room :mad: Bad planning again!
Do you know if some kind of 90° adapters exist for MT75? That would save my life!
Also, I cant figure out how the cable stays in place on the gearbox side. There should be a kind of clip, but I don't have it and actually, I don't remember removing it from the gearbox when I stripped my donor. I would be glad if someone could tell me how it is held in place, and even show me picture of the needed part.
Thank you very much.

rpjg1975
22nd April 2014, 03:30 PM
You need a circlip.....if memory serves me correctly.......

1742

Russ

jps
23rd April 2014, 01:02 PM
I don't remember removing it from the gearbox when I stripped my donor.

I remember exactly how I removed mine - by lifting the gearbox out using the engine hoist - without disconnecting the cable first....

Luckily it bounced off the floor of the car and didn't travel too far - so I found it in the end....!

ayjay
23rd April 2014, 07:58 PM
Put mine in a safe place until needed:o

You can get them on ebay:o

alga
24th April 2014, 11:16 PM
Taped mine to the speedo cable!