Help forwarding a reamer to Estonia?

[mopple]

Managed to find the taper reamer for Sierra uprights from one Irish webshop (http://www.joemckenna.ie/axminster-repair-reamer-3-4?keyword=axminster), but they do not ship to Estonia.
So could some fellow builder give me a hand by receiving it at UK/Ireland address and then forward it to me? Of course I will cover all the costs plus some extra for the trouble.

Regards,
Madis

[vmax1974]

I sent something to estonia a few weeks ago cost a bloody fortune for a small 1kg parcel cost me £24 and that was the best price I could find but if you need to I will take it in and forward it to you

[voucht]

Hi Madis,
If you find a Swedish webshop that sell the same parts, I can buy it for you and send it to Estonia, it might be cheaper than from the UK.
Or if you give me the specs of the reamer, I can try to fond it here.
Do not hesitate if you want me to do so.
Good luck!

[flyerncle]

Have you tried Axminster direct,shipping is a fortune.

[SeriesLandy]

Have you tried Axminster direct,shipping is a fortune.

When I last looked they didn't do the 19mm one anymore.

[flyerncle]

Typical :(

[SteveH1]

Hi im in ireland if u wanna send it to me and ill send it on no problem
Thanks
Stephen

[mopple]

Thank you all for the feedback.
At the mean time I had a read on the super7thheaven blog (http://www.super7thheaven.co.uk/) and he suggested to use a 1-1/2" per foot (7.15 deg) reamer from States.
SteveH1 I will PM you when I will go the Axminister route from Joe McKenna's, thanks again for giving a hand.

[alga]

What about the Axminster one you borrowed from me 3 or 4 years ago? Unsatisfied with the taper, or another set of uprights to ream? I could send you mine again (but it's lent to someone else now, too).

[alga]

Also, I bought a lot of stuff from "UK only" senders via a parcel forwarding service. You get the stuff sent to their address in Barking, Essex, they bring it over with a van once or twice a week, and you get it delivered by DPD, all in ~5 days for 8€ for a small package. You could look for a similar service based in Estonia...

[mopple]

Hi Albertas,
The Axminister one is fine, just want another set to ream. With your reamer years back actually I did two sets of uprights. One of them is currently on the road on Sylvain's car. From others on one strut clamping thread is goosed, so I would like to use one with proper thread.
Thats a good idea about the forwarding service, I will have a look at it and after all I can bear also the £24 postage fee to Estonia. Cheers!