View Full Version : Retaining front lip of bonnet
Josh
5th July 2016, 08:29 PM
Hi all,
I have a pair of aero latches to hold down the back of my bonnet. Has anyone had any success building a 'tongue & groove' between the nose-cone trailing edge and bonnet leading edge?
Failing that, I'll just use a second pair of aero latches at the front...
Thanks!
Josh
Ben_Copeland
6th July 2016, 06:23 AM
The equinox nose cone / bonnet has tongue and groove connection but I wouldn't trust it past a location device to line the two up.
Much better to have a locking device because once wind gets underneath it's taking off !
Rosco
6th July 2016, 08:26 AM
http://i133.photobucket.com/albums/q62/corsaboss/May%202016/9022C43C-5C7F-4E5F-BD41-B0B3D0F3C25B.jpg (http://s133.photobucket.com/user/corsaboss/media/May%202016/9022C43C-5C7F-4E5F-BD41-B0B3D0F3C25B.jpg.html)
i made these and bolted in the nose lip. and two holes in the bonnet,
vmax1974
6th July 2016, 07:20 PM
I would use catches front and back on either mine equinox and agm bodywork
RichardH
6th July 2016, 08:43 PM
I would use catches front and back on either mine equinox and agm bodywork
good cause i have bought four catches:)
SeriesLandy
9th July 2016, 03:04 AM
I've got catches front and back on mine. I had an oh shit moment last year when I had only do up one side. The bonnet tried to come off at 60mph.
They still held though.
garyt
9th July 2016, 07:34 AM
I have 4 over center catches on mine as well,
one thing I have noticed though is that once all is hot, there appears to be some "bonnet spread" not really sure how other to describe it but it has been enough to pop a catch while driving.... so whilst doing the mods I am going to put a couple of locating pins in the top rail and corresponding locating holes in the bonnet return lip to prevent this
Just to clarify I should have added I have a Gillham bonnet
Gary
voucht
9th July 2016, 06:45 PM
Hi !
I have a pair of bonnet Locating Pins on my Equinox bodywork, they work like a charm. Much neater, lighter, cheaper, easy to fit, than another pair of latches in my humble opinion.
They are available from Kit Spare http://www.kitspares.co.uk/index.php?route=product/product&product_id=770&search=bonnet+pin
https://c1.staticflickr.com/8/7290/28163781696_7d7aae590b_z.jpg (https://flic.kr/p/JUJK63)2014-08-22_14-27-55 (https://flic.kr/p/JUJK63) by Sylvain ROIG (https://www.flickr.com/photos/99498333@N06/), sur Flickr
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.