View Full Version : Oh so quiet
Bonzo
25th June 2009, 10:45 PM
Some of you may have noticed that I have been quiet on the forum this week :D
I heard that loud cheering from here. :p
Spent the entire week so far on my build. Hoping to get the chassis painted in the next few days. :)
Pleased with my progress as this is the first time since January that I have been able to spend some time on the Roadster. :cool:
HandyAndy
25th June 2009, 11:19 PM
a big well done Ronnie, its great that you are getting your chassis done, how about another completed build at stoneleigh next year? :cool: :)
all the best
andy
AshG
26th June 2009, 07:53 AM
Ronnie Ronnie Ronnie. all this talk but where are the pictures. :D
Bonzo
26th June 2009, 08:02 AM
Ash, soon I promise :o :o
Just as soon as the chassis is wearing a nice new coat of paint ;) :D
Spikehaus
28th June 2009, 08:47 PM
In the Westcountry we only have dial up modems and valvestate Pc's, so it take us a little longer to make posts! LOL
Ronnie Ronnie Ronnie. all this talk but where are the pictures. :D
fabbyglass
28th June 2009, 09:19 PM
Dreckly everything even the bizzies.......:rolleyes:
Bonzo
29th June 2009, 12:15 AM
The welder was working nicely yesterday !!??
Must be the hot weather ? or was it that I was wearing my glasses :confused:
http://i274.photobucket.com/albums/jj266/Bonzoronnie/001-2.jpg
By the way..........A sneak preview of my chassis for Ash :D :D
AshG
29th June 2009, 09:34 AM
looking good. when do we get more?
i think you have the highest post count to lowest picture count ratio on the whole forum :D
Bonzo
30th June 2009, 07:35 AM
looking good. when do we get more?
i think you have the highest post count to lowest picture count ratio on the whole forum :D
Yay, does that mean I get a badge or sumat :D
I do strive to be the best at what I do :confused:
Pictures will be up sooner than.........Dreckly :rolleyes:
Bonzo
7th July 2009, 08:37 AM
I thought That I would update you all on my progress thus far
Having dug my chassis out from the darkest corner of my workshop at the end of last month.
I was determined that it was going to have a nice shiny coat of paint on it within two weeks.
Finally being able to post some pictures on the forum was my goal, pictures that I could be proud of ;)
Now Three weeks into my restart & I can honestly say that I am finally running out of bits & bobs to do before painting !!??
Each day I have gone out to the workshop with a list of things to do, as usual for me, I grossly under estimate the time that it will take to do those jobs. :eek:
The good news is that I am still feeling well & my energy levels are about parr for the course.
All being well painted by the weekend :o
I would love to think that by the end of the month, I would be able to get my build on its wheels but probably that's a tad unrealistic. Going to run out of steam sooner or later !!??
In the meantime folks, i'll keep on plugging away, doing as much as I am able too ;)
HandyAndy
7th July 2009, 08:41 AM
Nice one Ronnie, we,re all eager to see your progress photos, keep at it.:) :cool:
andy
Bonzo
7th July 2009, 08:56 AM
To be honest Andy
It was meeting all of you good folks at Stoneleigh that gave me the burning desire to restart my buid. ;)
I was lucky enough to see Spikehaus's build in the flesh a short while ago, that gave me an even bigger kick up the ass :D
It made me realise that I am not too far behind his progress & in fact, most of the hard work is done. :cool: :)
jasongray5
7th July 2009, 10:28 AM
Well done mate, hopefully not too long before your rolling it around your workshop! And if your energy levels do take a dive, please dont hesitate to give us a call and I will come and give you a hand for the day or summat!
most of the hard work is done. :cool: :)
Realy??? one word, megajolt...:p :p
Bonzo
7th July 2009, 12:43 PM
Cheers for the offer Jas :)
Jobs left to do !!??
Cut & weld little squares to cap all of the open ends of the chassis tubes
Make & fit CP17
Weld the round bits to the end of the headlamp stalks
Finally have a good re-read of the book to make sure that I have not missed anything
Ohhh & find out where CP9 & CP25 plates go !!??
May have used them allready but to be honest bu**ered if I know :o :D
Once I have done that little lot, preperation ready for the primer & topcoat :cool:
HandyAndy
7th July 2009, 05:36 PM
i believe CP9 & CP25 go in the rear tub area, bracing bits for uprights of the rear tub, i say i believe as i don,t need them with the Triton tub. ;) :)
andy
Bonzo
7th July 2009, 05:57 PM
Cheers Andy
Whilst I am on here.
I am looking for the general dimensions of Fabbys nosecone
Having obtained a Nissan Micra radiator today it is looking a tad too tall :confused:
To be exact, I am wanting to know the height of the noscone above the front frame / top rails & how far forward the radiator can come out from the bottom of the front frame without hitting the inside of the lower part of the nonescone !!?? :confused: ;)
If the radiator is suitable, I can then fabricate the radiator mountings. That will be one less area of paintwork to damage :o
HandyAndy
7th July 2009, 06:22 PM
just having dinner, :o
i can get the measurements tomorrow for you. ( nose & my rad are at mothers place).
be back soon:eek:
andy
turboporscheandy
7th July 2009, 09:07 PM
well done Ronnie keep up the good work fella! Its good to see another car in the flesh its a megajolt in the butt to make progress!(d`ya like what I did there!lol!)
Andrew
Bonzo
7th July 2009, 11:23 PM
well done Ronnie keep up the good work fella! Its good to see another car in the flesh its a megajolt in the butt to make progress!(d`ya like what I did there!lol!)
Andrew
Very good ;)
I just wish I could get a Megasquirt on with the build :rolleyes: :o :o
Bonzo
8th July 2009, 09:22 AM
i believe CP9 & CP25 go in the rear tub area, bracing bits for uprights of the rear tub, i say i believe as i don,t need them with the Triton tub.
andy
You are dead right Andy.
Just located them in the book.
I sort of done my own thing in that area, thats one less job to do then ;) :D
Well back out to the workshop, nose to the grindstone & all that
Lets see if I can manage to get more than 2 jobs done today :eek: :o
HandyAndy
8th July 2009, 09:33 AM
took me a while to work out where those bits went, as i,m not using them i thought i must,ve missed something elsewhere on the chassis :eek: :D
have a good day on your build, my plan is the footwell plates & cut out the rail to allow the gearbox to go in & finish the engine/box mounts.
cheers
andy
Bonzo
8th July 2009, 10:15 PM
I managed to get a fair bit done today.
Just the Radiator mounts to do tomorrow, then i'll be finished with the welder for the time being. :cool:
Many thanks to Andy for the measurements, it will take the guesswork out of the rad mounts. ;)
I dare say after the weekend, I'll be fed up with painting. Not my favourite of jobs. :rolleyes: :o
Bonzo
10th July 2009, 09:00 PM
The chassis is now nicely coated in primer :eek:
Top coat on over the weekend :)
Pictures to follow very soon :D :o
HandyAndy
10th July 2009, 09:35 PM
can,t wait for the photos Ronnie,
a big well done , thats alot of progress on your build in a few short weeks.
:) :cool:
andy
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.