33.7mm x 2.6mm wall tube

[andyuk697]

hey guys

why cant i find any 33.7mm x 2.6mm wall tube anywhere

cheers Andy

[Bonzo]

I guess it just depends where you live :confused:

My local stockist keeps it on the shelf in handy 2m lengths :)

If you get really stuck I could post you some up. ;)

[andyuk697]

I guess it just depends where you live :confused:

My local stockist keeps it on the shelf in handy 2m lengths :)

If you get really stuck I could post you some up. ;)

i live in southyorkshire i cant find any on the net ebay or anywhere ive even tried google lol

how much do i actually need anyway? if you bought a 2m lenth you must have some spare you should sell the off cuts off lol

cheers Andy

[Bonzo]

I was sneakier than that !! .......... I got several 1.7m lengths from the off-cut bin :D :D

If memory serves me right, you'll need about 18 bush tubes ( 16 for the wishbones + 2 for the rear camber adjusters ) Each 35mm long, 1m would be plenty.

I believe there is a spare set of tubes in the workshop wich have been machined to the correct length ;)

Was going to stick them on ebay but never got round to doing it ;)

[Talonmotorsport]

I can sell you the right amount all ready cut and bored to size if you want.

[Rik178m]

Howmuch would you sell them for?

[frankie boy]

HI
The tube is the same size as 1"1/4 gas pipe. So you get it from your local pumbers merchant if you cant find it in steel supplier.

[Talonmotorsport]

I've just looked in the bottomless bucket which holds the 300+ bush tubes, and to my suprise I can see the bottom :rolleyes: so if any body wants some I'll wait a week to see how many is wanted then order the steel which will be ERW, just weld the CDS bars to the seams.
The bush tubes will be a £1 each due to the time it takes to cut , BORE and deburr.

[Land Locked]

I've just looked in the bottomless bucket which holds the 300+ bush tubes, and to my suprise I can see the bottom :rolleyes: so if any body wants some I'll wait a week to see how many is wanted then order the steel.
The bush tubes will be a £1 each due to the time it takes to cut , BORE and deburr.

Would you be prepared to post to Sarf Efrika?

[3GE Components]

http://www.3gecomponents.com/templates1/view_product.php?product=1840&site=63&department=116

[Talonmotorsport]

I can post them no problem.

[Rik178m]

What are the postage costs inside the UK?

[Talonmotorsport]

22 bush tubes at £1 each plus postage within the uk will be £6.50 by Inter Parcel so £28.50 a set.