brake part list

[carlknight1982]

getting my brake pipes together this week, what do i need to get?

Ive got about 25ft of copper hose, im planning to get my braided hoses from rally design, im just trying to put a list of what ends etc i need.

so far i have


25ft of brake pipe
sierra master cylinder
calipers all round
clevis


so help me finish the list guys so i can get it all done in one hit.

[HandyAndy]

without trying to hard sell the kits we at Saturn supply but if you look on our website in the stores page under brake & suspension products, it lists what parts are in our "Brake kits",
hope this helps, & if you have trouble sourcing the parts .... you know where to get them :o ;) :D

cheers
andy

[deezee]

Well your also going to need some T-pieces for the rear and also where you attach the pressure switch too. Then you'll need all your unions for connecting it together. Also don't forget all your P clips for fixing the lines down, along with the tools for flaring and bending the copper hose.

[carlknight1982]

lol andy im trying to get the brakes done Before i come to see you and spud!

is your kit suitable for rear discs?

Carl

[HandyAndy]

The kits we supply are universal, & so yes, depending on how you intend to route your brake lines to your rear discs this kit should do the job, tho I have read somewhere some folk put an extra "T" piece in for rear disc setups :confused:

cheers
andy

[carlknight1982]

with the standard master cylinder isnt it one line to the rears and a line to each of the fronts as there are only 3 points on the master cylinder

[HandyAndy]

with the standard master cylinder isnt it one line to the rears and a line to each of the fronts as there are only 3 points on the master cylinder

Yes thats correct Carl,

Like i said earlier "that i,d read somewhere that some folk put an extra "T" piece in the rear"......I just don,t why.:confused: :o

cheers
andy

[carlknight1982]

just a thought andy looking at your kits i dont think your rear flexis will clar the wheels when using the book spec uprights for discs and turning the calipers upside down.