Steering Rack Brackets

[tkpm]

I have just got around to test fitting my steering brackets, and seem to have a lot of play in the narrow bracket.

Can anyone tell me what inside height of this bracket should be, have attached a picture of the measurement i need.

770

Thanks for the help in advance :D

[AshG]

there is meant to be a grey nylon packer with that mount to take up the slack

[ozzy1]

The dimension A is 37mm,but as ash says there is a grey packing piece which is 29 x 26 x 5.8mm.

[dogwood]

There's supposed to be a......Oh Bu***r...:D

There Is a thinner one on the other side...

[spud69]

Did you get them off us TK, as said there should be 2 spacers in the packet.

You could always use some steel plate as spacers to get them tight.

AndyH

[tkpm]

My problem it's seems is that i have the spacers missing.:mad:

Spud i bought the brackets from ebay before you started selling them, i have contacted the seller, but don't hold out much hope of getting them.

Will give it a few days then make up the spacer myself.

Thanks for the help :D

Terry

[tkpm]

Got home from work tonight , to find a padded envolope with two spacers in it from the guy i bought the brackets from and a cheque for a refund for postage for the brackets as an apologue.:D

What a nice bloke, well chuffed :D :D