Have I got these right?

[Rik178m]

Got abit confused from the books drawings so just thought I'd confirm on here. Have I got these bits welded to the correct side and position on the plate? Also are m8 bolts strong enough? was tempted with m10.
http://img37.imageshack.us/img37/7434/img0138f.jpg (http://img37.imageshack.us/i/img0138f.jpg/)

[gingea1pom]

Arhhhhhhh

Can’t see pictures at work.:mad: :mad: :mad: :mad:

Someone will be along soon

Cheers Ginge

[Rik178m]

boooooo haha

[spud69]

You've got it fine, the 35mm goes on the inside the way you've got the plates....;)

I'm sure there has been a thread about this before but the M8 bolts are fine, the breaking strain of 8.8 M8 bolts is 2,985kg x 8 = 23,882kg. I think that should be sufficient.

AndyH

[Rik178m]

Wooooooo. Excellent! does the 19mm box need fully welding too? Ahhh 23,882kg sounds plenty strong enough! Thanks

[HandyAndy]

yes, fully weld the 19mm box, but do this before you weld the upper shock mounting on, otherwise its difficult to get the welding tip into where you need to weld ;)
don,t ask how I know that :eek: :D

cheers
andy

[Rik178m]

haha that was going to be my next question (which bit to weld first).

Thanks again! :D