Fan Belts

[davidimurray]

Having made up my alternator bracket last night, i wrapped a bit of wire around all the pulleys and worked out that I need a belt which is approimately 860mm inside circumference. Just popped to halfords at lunch to find they have an abysmal selection of belts totalling 3 to chose from!!!

Does anyone happen to know what section belt the pinto pulleys take? I spotted these on bearing boys that would be ideal - http://www.bearingboys.co.uk/AX34_Cogged_V_Belt-11136-p

Does anyone know if that section belt will fit?

Cheers

Dave

[AshG]

i used an 875A from halfords. works fine. i have got an 865 that didnt fit mine if you want that.

[davidimurray]

Ash that would be great - PM sent

[DStanley1809]

My Halfords computer system is saying 875B, £3.99.

I don't have one to look at but comparing other belts of the same the numbers (687A vs 687B etc) the only difference is a very slight difference in width. B is about 1mm wider.

[Enoch]

I've got hundreds of belts in stock, I will have a look tomorrow and see aht I have in that length, if you like.
Enoch.

[RAYLEE29]

Sounds like you went to a small store the one i work in has has loads of belts ranging from 600 up to about 1830 and a, b, c, and 3pk 4pk 5pk etc it is a superstore though Ray:)

[Enoch]

We have an 863 in stock, have pm'd you.

If anyone else needs any belts have a look here:
http://enochsemporium.co.uk/index.php?main_page=index&cPath=6&sort=20a&page=3

We don't have a huge stock but you might find what you need in there.
Enoch

[Bonzo]

A lttle off topic I know :o

I have just spent a good while browsing Enochs Emporium .... Blooming heck mate, you have something in there for everyone :cool:

Darn near caused a fight here !!?? .... I want a petrol hedge trimmer for Junior to use in our garden & Yep you have guessed right, Junior wants the Speedboat :D :D