PDA

View Full Version : Headlamps - 7" or smaller?


Josh
12th May 2010, 08:55 PM
Hi

I've been looking at headlamps and I'm not really a fan of the 7" after seeing them on some 7's at Stoneleigh. Does the IVA allow for smaller diameter lights (can't find anything in the manual about it :confused: ) ?? I'm looking at these 5 3/4" lamps - http://www.cbsonline.co.uk/complete-headlamp-chrome-5-wipac4-1654-p.asp

Will they be OK?

cheers
Josh

Bonzo
12th May 2010, 09:02 PM
They look to be WIPAC headlamps & according to CBS they are standard Caterham lights.

Should be fine for IVA :)

Josh
12th May 2010, 10:16 PM
Good stuff :)

I'll be making my headlamp support brackets tomorrow then. How far out have people put their 'lamps from the chassis? ie how long shall I make my supports?!:p

I think I red somewhere that the headlamps must be no more than 400mm from the outer edge of the car??

Cheers
Josh

gingea1pom
12th May 2010, 10:23 PM
Josh,

You could try this (http://www.haynes.co.uk/forums/showthread.php?t=2744) thread.

Cheers Ginge

spud69
12th May 2010, 11:34 PM
I agree with you Josh, 5 3/4" lights looks much more in proportion with the car and are fine for IVA. Yes they need to be within 400mm of the outer edge of the car.

AndyH.....;)

twinturbo
13th May 2010, 06:25 AM
I got cheapie 7's from bolt on bits, brief review on my website. My intention is to swap for something more pleasing after the IVA.

I may donate my lamps to the Club for IVA passing loans ;) once i am over that hurdle.

TT

Josh
13th May 2010, 08:38 PM
Those lights from CBS are very nice but the price is a bit silly... I think I'll go with bolt on bits too TT - these... http://www.boltonbits.net/black-headlamps-p-73.html - still IVA OK?

Josh

PS. How are people feeding the wires into the car? I'm thinking I'll drill an outlet hole on the headlamp support and bring the wires into the car via a small grommet, to save weakening the chassis rail with a couple of holes?

twinturbo
13th May 2010, 08:44 PM
Can't see them being an issue.

TT

Tilly819
14th May 2010, 01:18 PM
i used 4 inch dominators had to modifigh them to kick up left but part from that they were fine

tilly

carlknight1982
18th May 2010, 08:03 PM
Im using Dax Rush headlights, I just prefer the look of em to the round ones.

twinturbo
18th May 2010, 08:16 PM
I want rush ones, but they ont pass the IVa.

TT

carlknight1982
20th May 2010, 03:22 PM
According to dax the new ones will

twinturbo
20th May 2010, 06:56 PM
Ohhh, they have new IVA freindly ones?

TT

carlknight1982
20th May 2010, 07:11 PM
apparently lol,