Rear uprights

[martin62]

Hi can someone help me I am trying to work out which way ru7&ru8 are positioned.I am using brake drums if I go with pics on page 69/70/72 and offer up the drum assembly the bleed niple will be to one side where as if I use pic on page 74 the bleed niple will be at the top where it normally is.Can anyone which one is right as I dont have much hair left to pull out.Thanks Aidan

[Bonzo]

Hi Aidan

If you are using the first edition of the book, the drawings were noted wrong.

Here's a picture of some of my suspension components .... You may just be able to see which way the plate goes for drum brakes

http://i274.photobucket.com/albums/jj266/Bonzoronnie/100_0434.jpg

The small flat edges sit in the upright horizontal for drum brakes & vertical for disk brakes :)

My Uprights are made for drums & have been test fitted on the rolling chassis, all is as it should be ;)

[martin62]

Hi Ronnie thanks for the picture your right I bought the book 3 years ago in detling.Have them tacked up now I did not know there were any amendments for the uprights.

[Bonzo]

No problems :)

At least you noticed the problem before you had them fully welded up :eek: ;)