Rear PDC of the wheel bolts.

[bobbyh]

Hi,

quick question what is he PDC of the rear wheel bolts??

thanks

[David_17]

4X108 iirc

[bobbyh]

is that the same on all sierras? thanks

[David_17]

Think it's the same on most fords (appart from the new ones). But the sierra pickups (P100) have 5 stud hubs.

[bobbyh]

Thanks for the help

[flyerncle]

Peugeot pcd is the same for the four stud variety and possibly Citroen.

[ozzy1]

Definately citroen also.

[twinturbo]

And Saab 4 Stud on the older models.

Offset on PAS group cars is usually only 15mm where most FWD/Sierra/Granada fords is closer to 35mm. Old fords usually were around 15 though.

TT

[alga]

Audi also used 4x108 PCD. The centre bore is smaller though, 57 mm on Audi, 63.4 on Ford.

[twinturbo]

is it not 5x108 on Audi?

Center bore is defo different as I have Hubcentric rings to fit my Granada 5 studs to My VW based Galaxy.

TT

[flyerncle]

Older 4 stud setup possibly,I have some multifit 17,s so will try them tomorrow.

[alga]

Audi used 4x108 wheels on Audi 80's and Audi 90's.

Here's a handy page with wheel specs of most cars: http://www.peugeot-klubas.lt/gerybes/straipsniai/ratlan.html