PDA

View Full Version : front botton arm mesurements


thwang
26th September 2010, 08:40 PM
hi all
whats the over all diamentions for the front bottom arms i.e/: from the tip of the bottom ball joint to the out side of the bush tube. the reason i ask my jig been thrown in the skip lucky i,d tacked the 5mm plate and tubes up i havnt the book at hand ive loaned it out.
si

Trif
26th September 2010, 10:30 PM
hi all
whats the over all diamentions for the front bottom arms i.e/: from the tip of the bottom ball joint to the out side of the bush tube. the reason i ask my jig been thrown in the skip lucky i,d tacked the 5mm plate and tubes up i havnt the book at hand ive loaned it out.
si

The book dimension is from the outer edge of the 5mm plate to the centreline of the bush tube and is 442mm
Trif