My Build Table....

[Twin]

http://img218.imageshack.us/img218/7425/20101012192423.jpg

Just need to mark it out & get welding....

after I learn to weld :)

[Bonzo]

Looking good there Twin :)

Not long now before the chassis will fill the board ;)

Looks like you have some nice equipment to work with :) :)

[AshG]

is that door paint on it?

if it is get the scraper out as it burns bloody well when welding. don't ask how i know.

[spud69]

Thats looking nice and a hell of a workshop there.

But Ash is completely right - you will probably need to put a sheet of 1/2" ply over the top, if you try and remove the paint it will still be in the grain and will burn and give off nasty fumes.

Good luck with your build.....AndyH

[twinturbo]

Woudl be nice to have a pillar drill, good table :D

TT

[Twin]

Looking good there Twin :)

Not long now before the chassis will fill the board ;)

Looks like you have some nice equipment to work with :) :)

That's what she said last night!!!

[Bonzo]

That's what she said last night!!!

:D

Mine said " If you can't give me 10" you are no good to me "

I told her " Get lost, I ain't cutting 2" off for nobody " :D :o

I'll get my coat & you get back to marking out that build table .... Full chassis by Sunday :D

[Twin]

all marked up now :) got all me blocks screwed on too.

[HandyAndy]

all marked up now :) got all me blocks screwed on too.

when i first read that I thought it said "b@ll@cks" :D :D

I,ll get my coat :p

cheers
andy

[Twin]

oooh! done these too today :) (a few spares too)

http://img256.imageshack.us/img256/6953/20101013133523.jpg

[K4KEV]

oooh! done these too today :) (a few spares too)

http://img256.imageshack.us/img256/6953/20101013133523.jpg

Where do they go Mr T??:confused: :confused:

[Twin]

Nothing to do with the table sorry :o

Was just saying that I finished the table & done my crush tubes too.

sorry about the confusion! I was eating some of them Randoms :p