Roll Bar Group Buy Round 5

[AshG]

Ok Guys sorry for the delay have been mega busy with work for the last few weeks.

If you want a roll bar please add your name to the list.

Normal rules remember I need minimum of 10 payments before i can do an order so late payers hold everyone up.

I would like to get this one out of the way before Christmas as i am starting a new kit build in Jan and will need the space.

OK GUYS I HAVE PRICES price has jumped a fair bit due to material costs/availability.

The current price is £45.80p Plus postage £9 to the UK. (collections are welcome. if you need more than one roll bar or are not in the uk pm me for postal costs)

You can pay via paypal Ashgardiner (at) hotmail (dot) com please include your forum name, postal address and phone number.


1. DStanley1809 PAID
2. K4KEV PAID
3. Davey PAID
4. David_17 PAID
5. Wgroove (transport to Belgium) PAID
6. MikeB PAID
7. briansmc2005 X3 PAID
8. Loco_bill PAID
9. Andy_B PAID
10.Shaun PAID
11. Brainbug007 PAID

[DStanley1809]

1. DStanley1809
2.
3.
4.
5.
6.
7.
8.
9.
10.

Can pay whenever you would like :)

[K4KEV]

1. DStanley1809
2.K4KEV
3.
4.
5.
6.
7.
8.
9.
10.

Can pay whenever you would like
__________________

[Davey]

1. DStanley1809
2.K4KEV
3. Davey
4.
5.
6.
7.
8.
9.
10.

Let us know when payment is required and it shall be done.

D.

[David_17]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5.
6.
7.
8.
9.
10.

Let us know when payment is required and it shall be done.

[squbti]

hi ash, hope you dont mind me asking again but could you please look up the matirial info on the rollbar, gauge..... standard... i need to hand in some paper work on my roadster.
thanks
samy

[Wgroove]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6.
7.
8.
9.
10.

[Wgroove]

Hi Ash,
Why can't we just copy and paste the list that was filled in on 23rd october (see roll bar group buy round 4).
I think everybody on that list confirmed his order.:D

Greetz,

Wim

[David_17]

I wondered that too. Why did we start again?

[Loco_Bill]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Loco_bill
6.
7.
8.
9.
10.

Cheers, Bill

[Ashtonr]

hi could you advise if these rolls bars can be sent by courier and approx cost

[MikeB]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7.
8.
9.
10.

Ash think we had a group of ten listed in the previous thread, might be worth a pm to those who's names aren't on the new list to see if they are still interested?

[briansmc2005]

please add my name to list i'll take 3 if they end up around £40

[briansmc2005]

briansmc2005 07929 197 021,brian

[K4KEV]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7. briansmc2005
8.
9.
10.

copied and pasted for you bud, but if you want 3 you had better double check cost & postage with Ash

[Wgroove]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7. briansmc2005
8. Loco_bill
9.
10.

Somebody forgot Loco_ bill in the list !!
;)

[3GE Components]

If I read it right, Briansmc2005 wants 3, so that's this list complete, over to you Ash.

Kind regards

John.

PS, What's the new build, something mid-engined? :rolleyes: :D

[David_17]

Great. Has the price been confirmed yet Ash?

Also, will the rear stays and crossbar etc be available too? :)

[AshG]

sorry guys i have been in prague all week short notice work trip :-( im off to colmar next week but will try and chase for final prices.

i can only get the main roll bars.

As for material its 50.1mm steel 3.2mm thick. If you need the official material spec sheet it will cost extra but i will have to confirm the spec sheet price with the supplier.

[David_17]

Anyone else know any good suppliers for the crossbars/rear stays, as i'm sure making them a group buy will work out alot cheaper - There's atleast 10 people here that will need them. :)

Let us know when you want the payments ash.

[squbti]

hi ash, i´ve had a look arownd for 51x3.2 specs online & fownd what i needed & it seems to be ok with the tester. i dont know if he wants some kind of specs sheet or proof but i´ll let you know if i need anything like that & hopefuly you could help me out.
cheers/samy

[Andy_B]

1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7. briansmc2005
8. Loco_bill
9. Andy_B
10.

[shaun]

[QUOTE=Andy_B;48738]1. DStanley1809
2.K4KEV
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7. briansmc2005
8. Loco_bill
9. Andy_B
10.Shaun

[shaun]

Hey Ash,
let me know how to pay, just starting my build and collecting parts.
Shaun

[AshG]

Prices and postage details added

[David_17]

Payment sent, cheers Ash.

[brainbug007]

Too late to be number 11?

[Wgroove]

Hi Ash,
Send you PM !

Regards,

Wim

[DStanley1809]

Payment sent :)

[K4KEV]

Hi Ash......payment sent and thank you bud.;)

[Davey]

Payment sent, thanks Ash;) .

D.

[AshG]

wgroove pm sent with postage price.

6 more payments then i can place the order, as i said above i would like to get this out of the way before Christmas.

[AshG]

forgot to add if you are not on the list and want a roll bar there is still time as long as you pay up before the last person on the current list.

[Andy_B]

Thats me settled my debt...cheers !!

[shaun]

Payment sent, Thanks Ash.

Shaun

[brainbug007]

Payment sent, thanks mate :)

[K4KEV]

[QUOTE=Andy_B;48738]1. DStanley1809
2.K4KEV......................PAID
3. Davey
4. David_17
5. Wgroove (transport to Belgium)
6. MikeB
7. briansmc2005
8. Loco_bill
9. Andy_B
10.Shaun

Might be an idea to mark "PAID" so that Ash and others know where we stand regards payment

[AshG]

K4kev check out the first post in this thread. have been doing it from the beginning. :D

3 more payments to go and i can place the order

[K4KEV]

Ooooops....sos Ash ...should 've checked....doooh:o

[Wgroove]

Hi Ash,
Payment send !
Regards,

Wim

[AshG]

2 more payments to go :D

[MikeB]

Didn't want to be last! think there's one more to go now!

[AshG]

one more payment until i can place the order. anyone have locobills contact details.

[Loco_Bill]

I know my contact details!

Payment sent Ash. Sorry I was the last one everybody!

Thanks for sorting it all out.

Bill

[AshG]

ok last chance anyone who wants one speak now as i am going to put the order in tomorrow.

[Doogle]

Any pictures of these?

[AshG]

Hi Ash,
Payment send !
Regards,

Wim


see here

http://www.haynes.co.uk/forums/showthread.php?t=3204

[AshG]

OK Order has been placed. Should be ready for the second week of December.

[brainbug007]

Sweet, looking forward to fitting it already :)

[Doogle]

When might you be placing another order?

[David_17]

Any updates on this yet Ash? :)

Also, anyone know a supplier for the cross bar and rear braces who'd do a group order?

[AshG]

yep. they are done got to pick them up and stick them in the post. still aiming for a pre christmas delivery.

all you need for the back stays and crossbar is 3m of tube, i used 38mm for mine it was about £15 for 6m at a steel stockist i gave what i had left over to ginge for his.

[Wgroove]

Nice ! Very Nice !
Looking forward to it !

greetz,

Wim

[Davey]

Yippee, I've just taken delivery of my roll bar. Thanks Ash;) .

D.

[K4KEV]

yippee 2...me too:D :D :D .... if we ever meet Ash, I owe you a beer or two

[DStanley1809]

Mine arrived at work at the same time I did.

Many thanks Ash :D

[David_17]

Mine came today too. Cheers Ash.

[MikeB]

Thanks Ash looks sweet

[shaun]

Thanks Ash. Perfect!!

[briansmc2005]

Thank You Ash,roll Bars Arrived Today

[Andy_B]

The way the delivery teams are working in Scotland i will be lucky to see mine before xmas i think .....bloody weather

[brainbug007]

You might be lucky, its snowin heavy round here and mine turned up today :) Thanks Ash!

[David_17]

all you need for the back stays and crossbar is 3m of tube, i used 38mm for mine it was about £15 for 6m at a steel stockist i gave what i had left over to ginge for his.

Will 3 one meter lengths do it?

[AshG]

should do for book spec not sure if you have a grp tub. ginge is the chap to ask as i gave him 3m and he has a grp tub. the cross bar is just under 1m from memory so that will leave you with 1m for each back stay. may be worth getting the tape measure out.

[gingea1pom]

My cross bar and rear stays are all just under 1m (930mm) so 3m should do you.

[Wgroove]

Still waiting for my rollbar.. :(

[AshG]

dont worry its on the way, they all got posted out the same day.

[Andy_B]

The race is on ...can it get to Belgium before Scotland....If it does it will show what a shit state we are in...and how a bit of snow can bring the country to a standstill.....Thanks for organising this Ash ...am in no hurry for it so dont worry....am more concerened about kids/wifes/dads and bro's prezzies that have been stuck in our crap postal sytem for 3 weeks now !!!!!!!

[briansmc2005]

i,m in glasgow got mine days ago.

[Andy_B]

Turned up today thanks again Ash !!!

[Wgroove]

dont worry its on the way, they all got posted out the same day.

Just got a message from my son that the rollbar arrived today !!! :D :D
Thanks Ash !!

Now i have to wait for the lower rear wishbones from 3GE.
Shipped 13/12 and still waiting... :(