PDA

View Full Version : Sierra Donors in Brandon, Suffolk


Simon_K
16th March 2010, 09:28 AM
Wiz along to e-prey and check these two out.

Pity they appear to have the less favoured 1.8 CVH engine.

http://cgi.ebay.co.uk/Ford-sierra-spare-or-repair_W0QQitemZ110506233304QQcmdZViewItemQQptZAut omobiles_UK?hash=item19baaf4dd8

http://cgi.ebay.co.uk/Ford-sierra-spare-or-repair_W0QQitemZ110506235755QQcmdZViewItemQQptZAut omobiles_UK?hash=item19baaf576b

Gearbox identification has been requested, as both are manual.

If you simply MUST have a 2.0 ltr Zetec, well they have that covered too.

http://cgi.ebay.co.uk/Ford-Mondeo-Estate-spare-or-repair_W0QQitemZ110506239103QQcmdZViewItemQQptZAut omobiles_UK?hash=item19baaf647f

twinturbo
16th March 2010, 11:47 AM
CVH always has a TYPE9

TT

Bonzo
16th March 2010, 10:26 PM
These 2 cars may prove to be a bargain basement source of donor parts :)

Just a couple of points to bear in mind.

Both have no V5 documents ( & You won't be able to get one ) , being ex US military there is not likely to be any record of them on DVLA's data base :eek:

This being the case .... There may be problems when it comes to registering your build with your local DVLA & almost certainly end up with a Q plate ;)

Just food for thought .... If you don't mind a Q plate & a little hassle, go for it .... There may be a bargain to be had :cool:

Bonzo
17th March 2010, 09:23 AM
I wonder if possible to get an age related plate if you can prove age of engine from Ford Heritage?

I doubt there would be any problem proving the date of manufacture for the engine :)

Problems will most likely arise when you try to prove the age & source of your other donor parts !!

In order to qualify for an age related plate, most of the donors parts count towards DVLA's points system for an age related plate.
With no V5 it is likely to prove difficult .... That's not to say it's impossible though :)

alga
17th March 2010, 09:03 PM
CVH 1.8 is OK. You won't be tuning it anyway, but you'll be able to use at least the shortened steel sump and starter for your Zetec swap ;-)