steering column center?

[Eternal]

Hi all.
Can anyone give me a hand and work out the center of the steering column in relation to the center line of the chassis? im using a granada column so the mounts are different also my chassis is a bit different so having a hard time trying to work out exactly where i should put the column. Also this will help me position the plate that the column goes into.

[ozzy1]

Surely you would want the steering column in the centre of the drivers side of the car.(middle of TR 9 section on drivers side) :confused:

[David_17]

yep, as above, the transmission tunnel is different both sides, so the center of the chassis wouldn't work.

The center measurement of the drivers footwell/steering mount can be worked out looking at cp16 (or cp17 I think) it is in the back of the book.

[davedew]

According to my cad model it is 290mm from the centerline of the chassis to the steering column centerline.

Cheers

Dave

[Eternal]

Great thanks guys. Will have another look in the morning with fresh eyes, sure that will help.