which wheels fit

[mgglep]

Sorry if this question has been answered but came to put the standard 14" Sierra alloys on today and yes they don't fit after alot of swearing etc found out that I need a set of 15s my question is will a set of fwd Ford alloys fit for example mondeo etc or will the offset be incorrect thanks for the help in advance

[Bonzo]

Hi

As far as I know any 15" Ford fitment alloy wheel should be fine :)

Mk5/6 Escort, Mondeo & the likes

If memory serves me right the PCD is 4 X 108 & ET of 38

Here's a little info from Alloywheels.com

Make : Ford Model : Sierra Year : 84 to 94 PCD : 4x108 Offset : 35 to 45 Bore : 63.4

Most 4 stud Ford rims seem to fall within that range ;)

Have a browse here

Alloywheels.com (http://www.alloywheels.com/search.asp?strkeywords=4x108%20et35,4x108%20et37,4 x108%20et38,4x108%20et40,4x108%20et42,4x108%20et45&strSize=15%22&strSort=Low&pos=1&Make=Ford&Model=Sierra)

[mgglep]

Thanks for the info

[baz-r]

peogeot have same pcd iirc :D

[HandyAndy]

My wheels came from a Ford Puma (also a FWD Ford), the only issue with them is I can,t fit the center caps on the rear wheels ( which are very concave) due to the hub nut on the Sierra drive shafts . Looks ok without the center caps tho .

cheers
andy

[flyerncle]

And some citroen........

[mgglep]

Just seems silly that for the sake of slightly narrrower rear arms the standard 14s wouldn't fit afterall it is what the donor has on it

[baz-r]

14" steels fit so some doners wil fit

[robo]

Just seems silly that for the sake of slightly narrrower rear arms the standard 14s wouldn't fit afterall it is what the donor has on it

There are a few things along the way like this but nothing that the lads on here have not got a answer too, just post your problems and an answer is probably just around the corner.I think there is more choice in the wheel and tyre options on the larger diameter wheels. And they are as cheap as chips.

Bob

[mgglep]

I have been given a brand new set of peugeot 15'' alloys and tyres the hole centres are the same and the centre bore hole seems to be the same to you think the offset will be an issue

[baz-r]

I have been given a brand new set of peugeot 15'' alloys and tyres the hole centres are the same and the centre bore hole seems to be the same to you think the offset will be an issue

the offset is diffrent so more of the tyre is on the outside giving you wider track

[mark100]

pug wheels will fit fine there the same as ford bolt patern you might need spline rings as there slightly bigger center bore but you can buy the rings on ebay for a couple of quid ive got peugot alloys for mine