jps
13th November 2012, 09:17 AM
Not sure if this is a 'chassis' or an 'interior' thread so apologies if it's in the wrong place. I spent Saturday fashioning a jig to support my MEV GRP seats and trying out the seating position for size. The chassis I bought already had some lower harness mounts in place - but I am not sure if they are likely to be in the right place come IVA time given where i've positioned the seat. I am also having a hardtime deciphering the IVA manual requirements - does anyone have any tips on working this out?? Seems I just have to avoid the harness fouling on the GRP when i'm in situ with the belts done up?
The thing that REALLY confuses me is that I can't see any specific requirements about where the mounts are relative to the driver - e.g. lower harness mounts don't have to be behind the driver - although logic dictates that's the only way they'll be effective...
http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/292701_10151218216876723_1347377708_n.jpg
The thing that REALLY confuses me is that I can't see any specific requirements about where the mounts are relative to the driver - e.g. lower harness mounts don't have to be behind the driver - although logic dictates that's the only way they'll be effective...
http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/292701_10151218216876723_1347377708_n.jpg