Diff Breather

[james3004]

The breather nipple has broken off of my diff so I removed the rest of it and now I'm left with a 10mm hole, any ideas where I can get a new one from or what I could do to solve the problem?

[carlknight1982]

Remove the back cover and cut a threat in it using something to catch the swarf. Then get a hose tail from ur local hydraulics place

[davedew]

Mine did the same. I just let the plastic piece in the diff and epoxied a piece of brake pipe into it. Then bent it over to face downwards.

Hope that helps.

Cheers

Dave

[Coozer]

Mines like that, just left it as is....

[snapper]

10mm fuel union with 1/4 NPT thread fits straight in

[ozzy1]

Someone like this mob might be helpful;

www.bgcmotorsport.co.uk



(NPTF TO TUBE 840 or 90° NPTF TO TUBE 842 in
adaptors and unions section)

[axle]

Remove the back cover and cut a threat in it using something to catch the swarf. Then get a hose tail from ur local hydraulics place

Could someone shade some light on this for me please. Mine has only got washer and a selftapper screw on it, is this how it supposed to be.