which clutch????

[whitstella]

hi

i've got a type 9 gearbox with bell housing, but i seem to be short of the clutch arm. does this come with a complete clutch kit or have i got to find 1 seperate????? the engine i will be using is a 2l zetec with hopefullt a 1.8l fly wheel. what clutch kit do i need and release bearing???

cheers steve

[jasongray5]

On my 1.8Zetec im using a standard mondeo clutch kit, but longer release bearing. Will try and find you the part number

[jasongray5]

Part No. CCT113. Its from a capri so that should help your search! Good luck!

[baz-r]

is it heavy at the pedal with this pressure plate?
i will be using a 1800 silvertop on a type9 and will be getting to this bit at some point

[jasongray5]

I dont find it too bad? Although if you did, then you could always move the cable down the pedal? if you see what I mean?

[alga]

On a 1.8 flywheel, you need Mondeo 1.8 clutch (220 mm disk, 26mm shaft, 23 splines). As for the clutch release bearing, some people make do with a Sierra bearing (Quinton Hazell CCT132), also I've heard some put on two of those, some get the longer CCT133 bearing. Here's a list of part numbers of equivalents in other catalogs: http://www.haynes.co.uk/forums/showthread.php?t=4036&page=3

[AshG]

i think you guys are missing something here. he is missing the actual clutch arm not just the release bearing.

the release arm should be with the box you wont get a new one with the clutch and replacements are like rocking horse poo. i would contact the person that sold you the box and ask if they still have it.

[jasongray5]

True story Ash! They come up occasionally on ebay, maybe keep your eyes peeled, or as Ash says, email the gearbox supplier?

[ozzy1]

Usually a few on ebay or Burton power used to do them brand new,links below.


http://cgi.ebay.co.uk/Ford-Pinto-Rally-Type-9-gearbox-clutch-Fork-Mk2-Escort-/280621739733?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41565beed5

http://www.burtonpower.com/

[baz-r]

what starter is everyone useing i got a fiesta zetec 1.8 one and a sierra 1.8 cvh one but the pinion clutch is dead so it will be cash for a recon if the fiesta one is no good :o

[jasongray5]

Im using one from a DOHC sierra? Works great, I have a spare one, but no solenoid on it?
Yours if you want it?

[baz-r]

Im using one from a DOHC sierra? Works great, I have a spare one, but no solenoid on it?
Yours if you want it?

what type is it my cvh one may fit :p

[fabbyglass]

So much easier to fit a bike motor than faff about with bits from different cars....oh that would annoy me as like to keep things nice and simple...:(