light arms

[whitstella]

hi i was wondering if anyone had a piece of oval or shaped tube for the front light stays for sale as i dont need too much just eonough for 3 as 1 could be wrong cheers peeps.

steve

[monsterob]

whats wrong with a piece of round bar squished in a vice ? :D

i may be going down this route

[TSM Locost]

Mine was the crash bar tube from an old fire exit door.

[minicountryman1961]

I used 1" x 1 1/2" tube. Under the light you can't see it anyway. Just drill a hole in it for the headlamp. Capped off the end. Note: In Illinois we don't have to SVA/IVA.

http://minicountryman1961.polaroidstudio.com/view_photo.php?set_albumName=album01&id=newcamera_006

http://minicountryman1961.polaroidstudio.com/view_photo.php?set_albumName=album01&id=newcamera_005

[ozzy1]

Saturn do them ready made for about 30quid.

http://www.saturnsportscars.co.uk/store/index.php?_a=viewProd&productId=70

[baz-r]

i have looed at a few diffrent kits and some just use a bit of flat plate with a hole in welded to the top of the top rail

only thing i can think of is projection issue on the iva
book item looks very complicated just to hold the head lamp on im sure it could be simplifyed and made of more off cut style parts :)

[whitstella]

thanks for the info.

somme good ideas now cheers steve.