propshaft services Bonnybridge Scotland [Archive]

axle

27th April 2011, 08:22 AM

Hi All
Just to let you I got a brand new propshaft made to suit my MT75 box for £12O by the above. The shaft came with new damper and joint and oven bake painted. So why not try them and tell me I send you along ask for David smith. Tel 01324 814202

http://www.omnius.co.uk/

Wgroove

27th April 2011, 08:47 AM

Hi All
Just to let you I got a brand new propshaft made to suit my MT75 box for £12O by the above. The shaft came with new damper and joint and oven bake painted. So why not try them and tell me I send you along ask for David smith. Tel 01324 814202

http://www.omnius.co.uk/

Hi Axle,
Can you send me some pictures ? I'm also in need for one to fit my MT75.
Thx,

regards,

Wim

axle

27th April 2011, 09:03 AM

Hi
The prop is fitted to the car now, I might have a picture please send me a PM and I see what I can do. What I would like to say for the benifit of the other members on the Forum is that. The prop was made with the sliding spline and the grease nipple on it and on the other end the dounut coupling.

Wgroove

27th April 2011, 10:02 AM

PM sent !
Regards,

Wim

Ashtonr

27th April 2011, 06:59 PM

Sounds cheap I got a price from Dunning Fairbank for 155 plus VAt so might go here now

Wgroove

5th May 2011, 01:03 PM

Hi,
Axle send me a photo of his propshaft, but i don't know how to insert it in this post. Last time i tried it, it failed.
For those who wants to see the photo, try this link:
https://picasaweb.google.com/Wim.Gijselinckx/Propshaft#5602935585652804514

Regards,

Wim

Wgroove

5th May 2011, 01:04 PM

Hi Axle,
Is the propshaft adjustable in length, or is it fixed ?

Regards,

Wim

axle

5th May 2011, 02:18 PM

Hi
I can not remember the length and there is no point in me telling the measurement here either. However it was made to my measurement and it is on a sliding spline with a movement of 20mm to compensate for the gearbox vibration.

Hope this is of some help